Hey y'all, first grow, first post, lurking for a while gathering info, and it's time to get into the mix. Some might say my goal is a little bit ambitious being a noob, but i'm pressed for time and need to make some medical cannaoil.
First, my question - what's the better trade-off for good grass.. cool tubes (winged reflector type) with reduced light output, or bare bulbs with overpowered fans stressing the plants with too much moving air ??
Here's my plan for grow room size and spec (in the beginning i was planning 2x 600w HPS, but then i realized i could get more bulbs in there, closer to the plants WITH a better spectrum mix, and more 'useable' lumen/PAR ouput):
- 1.2m to 1.3m W , 1.8m to 1.9m L , and 2m to 2.3m H (actual total length will be a little more for a clone/mother chamber)
- 6 plants
- 2x 400w dual spectrum HPS horizontally
- 2x 250w MH hanging in between the six plants
- Ventilation : this would be the question mark
So it comes down to the main question from above. I'm not sure as to which option is best/healthiest for my plants. I could go one way and put the 400's in series in cool tubes to keep temps down, drawing air from outside the grow room for them , and use a second small fan for the normal 1 to 2 air changes per 5 minutes .. or i could go the other way and leave bare bulbs while using strong ventilation to clear the whole grow chamber. The 250's i plan on leaving bare.
What do the more experienced have to say??
Next to that i'm not sure if should use both 250's for veg or one 250 together with one 400, before turning them all on for flower.
Any advice much appreciated.. i'm open to options!! One idea for example was to use normal winged reflectors and put holes in the tops where small fans would directly extract heat, IF someone could confirm that that would be effective for keeping total ventilation size down as to not stress the plants.
First, my question - what's the better trade-off for good grass.. cool tubes (winged reflector type) with reduced light output, or bare bulbs with overpowered fans stressing the plants with too much moving air ??
Here's my plan for grow room size and spec (in the beginning i was planning 2x 600w HPS, but then i realized i could get more bulbs in there, closer to the plants WITH a better spectrum mix, and more 'useable' lumen/PAR ouput):
- 1.2m to 1.3m W , 1.8m to 1.9m L , and 2m to 2.3m H (actual total length will be a little more for a clone/mother chamber)
- 6 plants
- 2x 400w dual spectrum HPS horizontally
- 2x 250w MH hanging in between the six plants
- Ventilation : this would be the question mark
So it comes down to the main question from above. I'm not sure as to which option is best/healthiest for my plants. I could go one way and put the 400's in series in cool tubes to keep temps down, drawing air from outside the grow room for them , and use a second small fan for the normal 1 to 2 air changes per 5 minutes .. or i could go the other way and leave bare bulbs while using strong ventilation to clear the whole grow chamber. The 250's i plan on leaving bare.
What do the more experienced have to say??
Next to that i'm not sure if should use both 250's for veg or one 250 together with one 400, before turning them all on for flower.
Any advice much appreciated.. i'm open to options!! One idea for example was to use normal winged reflectors and put holes in the tops where small fans would directly extract heat, IF someone could confirm that that would be effective for keeping total ventilation size down as to not stress the plants.