Need advice badly.

[Mad as a fart]

Hay folks, just wondering if anyone could give me an idea if the difference from using 2 x 600w and a 600w on a mover. I am wondering what would yields would be like given the Gr per W. i.e 600w = 600g. would the mver just spread it more?

 

[GhostBud420]

i dont fully understand your question. are you asking if you could yield the same with a 600w on a mover as 2 x 600w that are stationary?

 

[Mad as a fart]

I know ill not get the same but would it still just be the 600g +/-?

 

[putangluv]

nope thats a gram per watt. To get a gram per watt you need experience and special techniques of growing like sog or scrog. Also everything has to be nearly perfect like temps and all that

 

[GhostBud420]

well..lets say you had 6 plants thats yielded 500g total dry weight with the 2 x 600w thats 500g/1200w a little under a 1/2 gram per watt. now lets take that same grow with 6 plants and put them on a light mover and lets also say that you yielded 400g dry weight.
400g/600w is the ratio. obviously if your using a light mover your using watts more efficiently. Does this mean ur gonna yield more per watt if your doing it right?...i have never done light movers before but i would think the ratio is considerably better then a stationary light. again this is all assuming everything else is optimal for growing conditions.

 

[putangluv]

well..lets say you had 6 plants thats yielded 500g total dry weight with the 2 x 600w thats 500g/1200w a little under a 1/2 gram per watt. now lets take that same grow with 6 plants and put them on a light mover and lets also say that you yielded 400g dry weight.
400g/600w is the ratio. obviously if your using a light mover your using watts more efficiently. Does this mean ur gonna yield more per watt if your doing it right?...i have never done light movers before but i would think the ratio is considerably better then a stationary light. again this is all assuming everything else is optimal for growing conditions.

If you're doing everything right, all parameters, and high yielding strain, you can even yield more than a gram per watt.

 

[headbandrocker]

Use 2x600s

 

[Silky Shagsalot]

^^^what he said, if you can handle the heat.^^^

 

[Mad as a fart]

nope thats a gram per watt. To get a gram per watt you need experience and special techniques of growing like sog or scrog. Also everything has to be nearly perfect like temps and all that

I have already pulled over 616 from a 600w my friend

 

[Mad as a fart]

Use 2x600s

See the point is I need to know what the difference from a 600w on a track and 2x600w would be. U am trying to save power but gat much out it because I plan packing up for a while so need something to keep me going a while.

 

[GhostBud420]

sounds like a bad time to experiment to me

 

[kinddiesel]

put it this was . every body that stays in business I know don't use light movers. and people selling every piece of equipment and light movers on craigs list . fuck light movers