lets make some colloidal silver and fem some beanz aka selfing my banana puff
- Thread starter greenghost420
- Start date
greenghost420
Well-Known Member
awhile! lol im at 11 ppm right now. thinking how i can change a few variables to speed it up. its gonna prob take over a month lol i dont have that much time tho
Dogenzengi
Well-Known Member
http://www.cancertutor.com/csilver/
Cut and paste from page.
This article will describe a way to make colloidal silver at home. After the first batch of colloidal silver is made, the second and future batches should make one gallon of high quality 6 PPM to 8 PPM (Parts Per Million) colloidal silver in one and a half hours.
The fist batch will take about three hours, since it will not have the benefit of “seeding” the gallon with previously “cooked” colloidal silver (this “seeding” is necessary to create better electrical current in the distilled water). Once the first batch is made, future batches can be “seeded,” so it will take less time to make these batches.
All of the statistics in this article are based on a 400 mA (400 milliamp) power pack. Should someone use a 800 mA power pack, the necessary times will likely be shorter.
sound like 100 PPM is pretty high!
Cut and paste from page.
This article will describe a way to make colloidal silver at home. After the first batch of colloidal silver is made, the second and future batches should make one gallon of high quality 6 PPM to 8 PPM (Parts Per Million) colloidal silver in one and a half hours.
The fist batch will take about three hours, since it will not have the benefit of “seeding” the gallon with previously “cooked” colloidal silver (this “seeding” is necessary to create better electrical current in the distilled water). Once the first batch is made, future batches can be “seeded,” so it will take less time to make these batches.
All of the statistics in this article are based on a 400 mA (400 milliamp) power pack. Should someone use a 800 mA power pack, the necessary times will likely be shorter.
sound like 100 PPM is pretty high!
greenghost420
Well-Known Member
im running 1000ma but wish i had more then 5 volts!
SirGreenThumb
Well-Known Member
Well, my CS experiment worked. Took about 3 weeks, but I now have a male branch on my female auto.
Messed up my leaves around the branch, but she is doing well.
View attachment 3009055
Bud shot!
View attachment 3009056
Messed up my leaves around the branch, but she is doing well.
View attachment 3009055
Bud shot!
View attachment 3009056
greenghost420
Well-Known Member
good shit greenthumb!
SirGreenThumb
Well-Known Member
Yes, I will pollinate the same plant for some female seeds of the auto. I am also planning on using some of the pollen to get some seeds from the blue dream I'm growing also.
Thanks!!
SirGreenThumb
Well-Known Member
The blue dream is already growing and I have no more CS to use to convert a branch of her own, so I am going to use the pollen from auto anesthesia to pollinate her also. I should get prob about 25% auto with the rest reg fem seeds.
Hopefully the cross will create a super strain..
I could sure use a super strain, cause my tolerance is so high.
So the genetics should be:
Northern Lights
Black Domina
Blueberry and Haze strains¿?
~~~[ruderalis]~~~
Hopefully the cross will create a super strain..
I could sure use a super strain, cause my tolerance is so high. So the genetics should be:
Northern Lights
Black Domina
Blueberry and Haze strains¿?
~~~[ruderalis]~~~
bf80255
Well-Known Member
I suspect autoflowering is not a 100% dominant trait but in my own crosses
Ive found the f1 to not carry any autos at all. (Ive never ran a huge number of
F1 auto x photo but like i said ive not seen any, maybe the rudy used in my lines
Is a completely recessive trait but ive heard of autos in the f1 and "super autos"
I suspect may be nothing more than a plant with partial auto dominance
Which may be found in the initial cross, i dont know tho so im very curious
To see what comes of that cross!
I feel you on the tolerance i always like to alternate between bud and dabs on
Different weeks and every now and then go completely cold turkey
It really helps me with keepin tolerance at bay.
Oh and only smoking towards the latter part of the day i dont wake and bake
Anymore because i get too groggy and not as high at the end of the day when i need it lol
Ive found the f1 to not carry any autos at all. (Ive never ran a huge number of
F1 auto x photo but like i said ive not seen any, maybe the rudy used in my lines
Is a completely recessive trait but ive heard of autos in the f1 and "super autos"
I suspect may be nothing more than a plant with partial auto dominance
Which may be found in the initial cross, i dont know tho so im very curious
To see what comes of that cross!
I feel you on the tolerance i always like to alternate between bud and dabs on
Different weeks and every now and then go completely cold turkey
It really helps me with keepin tolerance at bay.
Oh and only smoking towards the latter part of the day i dont wake and bake
Anymore because i get too groggy and not as high at the end of the day when i need it lol
CaretakerDad
Well-Known Member
Just wondering where you're at with the low voltage CS generator, my attention span does not cover 10 days
. I feel much better now about the $50 transformer I bought to replace the 3 9v batteries I was using. 
greenghost420
Well-Known Member
My water was evaporating so i had it up to 16 before topping it down to 12. I checked last night it was 17... At 18 right now lol i dont think you needed to grab that transformer tho. I bet if i had 12v at 1a id be done, or close
CaretakerDad
Well-Known Member
You are at 18 PPM (that is IF you have filtered the solution to remove the byproducts of the process) after ONLY 10 days simply F'in amazing. Like I told you, your system is underpowered and will NEVER achieve the density you desire/need to produce female pollen. With my DIY system using 27 volts I produced 3 cups (3x the amount you are trying to make) of 45 PPM colloidal silver in about 4 hours. I am extremely pleased that I invested in the proper equipment and am looking forward to producing another series of batches in a few weeks to make another batch of female pollen from a different strain using the transformer at the recommended 30 volts. Another consideration as you are making your CS over an extended period of time is exposure to light as it changes the chemical composition. additionally taking this long to produce a single cup of CS will not provide enough to spray your plant for the required 2 -4 weeks.
greenghost420
Well-Known Member
The point of getting the higher ppm is to only treat a few times, not weeks. So my cup of cs will suffice.
SirGreenThumb
Well-Known Member
I know my bottle said 50ppm and it took about 3 weeks. Probably a little sooner, but I wanted to be certain that it turned, and it did. So around 50ppm works in about 3 weeks, but I would think it is also how the strain reacts to it.
So around 50ppm works in about 3 weeks, but I would think it is also how the strain reacts to it.
SirGreenThumb
Well-Known Member
Here is my converted branch
Here is a bud from the same plant. Auto Anesthesia
Here is a bud from the same plant. Auto Anesthesia
CaretakerDad
Well-Known Member
If you say so
greenghost420
Well-Known Member
i didnt say so, the article said so. im just sharing...
SirGreenThumb
Well-Known Member
My male branch decided to open without permission.
I got pissed off and cut off the branch.
I think I may have lost quite a bit of pollen. In hindsight I should have put a bag over the branch or cut it and put it in a glass of water angled over a plate or something else to catch the pollen. I was able to brush a bit of pollen on a flower, but I'm not sure how that works with getting the two to bone. 
I have the rest of the sacs inside a ziplock bag, not sure what to do with them yet.
I got pissed off and cut off the branch.
I think I may have lost quite a bit of pollen. In hindsight I should have put a bag over the branch or cut it and put it in a glass of water angled over a plate or something else to catch the pollen. I was able to brush a bit of pollen on a flower, but I'm not sure how that works with getting the two to bone. I have the rest of the sacs inside a ziplock bag, not sure what to do with them yet.