DiY LED - Cree CXA3070

nestor

nestor

Well-Known Member
I have every intention of getting a dedicated PSU for the fans. Money is a bit tight these days and this project will be on going for the rest of the month, the cell phone charger was just playing around with what's available at the moment.

I do have a quick question for you Supra: I'm planning on adding a toggle switch for the 3000k COBs. Would that require a DPST switch or an SPST? Looking at the single poles it seems like wiring it up would bypass the switch entirely, but this is my first project of this kind so, you know, ignorance. Also I'd like to say thanks for this thread. The information you've provided has been invaluable.
 
RedCarpetMatches

RedCarpetMatches

Well-Known Member
SupraSPL said:
That is an interesting COB and heatsink redcarpet where did you find that?

@ cannabare - ya I am trying to keep training to a very minimum. I fim them early if necessary and I will bend tops down when necessary or strap the stalk to the bucket if they start to flop over. I used to use LST and that is how I learned that it is too much work for my grow lol.
Click to expand...
Waiting back on an email with a link. They sell the cob and not the heatsink. http://www.superbrightleds.com/moreinfo/high-powered/vollong-10w-high-power-planar-cob-led/979/2386/
 
WDIK

WDIK

Active Member
Dismantled a bunch of computers a few month ago. Never thought I would be looking for heatsinks shortly after. :) They were the nice big Pentium II sinks also. Just salvaged a couple.
 
SupraSPL

SupraSPL

Well-Known Member
nestor you can get adjustable high efficiency 12v power supplies very cheaply ~$5. I have a bunch on order for testing. I am using a cell phone charger in one of my flower rooms and it is working great lol.

You can use a single pole switch just make sure you switch the hot wire on the ac side of the driver. You can determine which is the hot if you have a voltmeter. Just check to see which has a voltage reading against the ground.

Thanks for the link redcarpet. I looked at the specs of the COB and they are not too good lol. 5500K and should not be run harder than 250-300mA (5Watts)

WDIK awesome salvage
 
RedCarpetMatches

RedCarpetMatches

Well-Known Member
SupraSPL said:
Thanks for the link redcarpet. I looked at the specs of the COB and they are not too good lol. 5500K and should not be run harder than 250-300mA (5Watts)

WDIK awesome salvage
Click to expand...
Yeah that cob is corn. I just like the heatsink. I'm going to check out an aluminum extrusion company not to far from me. They might be willing to give me a deal on some pieces.
 
M

mtnstream

Active Member
Hey S, looking forward to 3590's at 2.7k. I think a few mixed in your 3k array would shoot off those ladies like rockets!
 
PetFlora

PetFlora

Well-Known Member
There's a handful (maybe 2) of you guys who really deserve mega kudos for all you are doing with DIY

I think we would all benefit from consolidating the 411 into one thread, but then it might get too big to quick

You (thee collective you) have helped me more than I can say. I'm still dumber than a box of rocks, electrically speaking, but you don't have to be a rocket scientist to get it that cobs + reflectors are not only a huge jump in grow tech, but simplify DIY to a point where I am ALMOST ready to jump in.

Now if somebody would start putting kits together....

Anyway, thanks from me!

And I'm sure if there was a 'Like' button, the counter would spin a few times
 
C

CannaBare

Well-Known Member
PetFlora said:
There's a handful (maybe 2) of you guys who really deserve mega kudos for all you are doing with DIY

I think we would all benefit from consolidating the 411 into one thread, but then it might get too big to quick

You (thee collective you) have helped me more than I can say. I'm still dumber than a box of rocks, electrically speaking, but you don't have to be a rocket scientist to get it that cobs + reflectors are not only a huge jump in grow tech, but simplify DIY to a point where I am ALMOST ready to jump in.

Now if somebody would start putting kits together....

Anyway, thanks from me!

And I'm sure if there was a 'Like' button, the counter would spin a few times
Click to expand...
I made a thread before I knew about not advertising in forums. I would love to get a group buy together on the 3070 2700k from arrow(we would have to buy 100). I would want 16 LED's for a 4x4 and I would offer my design and driver connection to the people involved. I think the 3070 is the best it can get but only in the 2700k color temp.

I can build A BADASS 4x4 cob setup for 1k. If I didn't have to buy 100. Still thinking about doing it anyway.

That's my offer on the table.

Canna
 
RedCarpetMatches

RedCarpetMatches

Well-Known Member
I have a 5x5 tent for flower. How many cobs would I need~20? Also, what do you guys think would be the most efficient way of supplementing UV...besides HID :) I just shit my pants over my power bill...no more 860w CMH for me.
 
C

CannaBare

Well-Known Member
RedCarpetMatches said:
I have a 5x5 tent for flower. How many cobs would I need~20? Also, what do you guys think would be the most efficient way of supplementing UV...besides HID :) I just shit my pants over my power bill...no more 860w CMH for me.
Click to expand...
Honestly if you space the cobs 12inches apart you can put a uvb CFL bulb right in the center and it will spread to every edge. No issues to date. Ill post pictures when I can. We need a general design thread.
 
RedCarpetMatches

RedCarpetMatches

Well-Known Member
CannaBare said:
Honestly if you space the cobs 12inches apart you can put a uvb CFL bulb right in the center and it will spread to every edge. No issues to date. Ill post pictures when I can. We need a general design thread.
Click to expand...
All that's just clutter to me. I know I could use floros, but I'd rather stick to the LED theme. I'll look into UVB stars. Thanks for input.
 
SupraSPL

SupraSPL

Well-Known Member
From my experience, UVB is not beneficial, especially for a large grow. Same with UVA for that matter. LED will give you incredible frosting and terpenes. You are better off spending those watts on PAR photons especially considering how inefficient fluoro tubes are. And I agree redcarpet it adds more complexity and clutter, reduced air flow etc. Just my 2 cents, experiment away :joint:
 
RedCarpetMatches

RedCarpetMatches

Well-Known Member
I've had great fat trich heads with UVB CFLs! Coulda been the strain. I've read that they produce more trichs for protection from harmful rays. I need a refresher course on the matter.

Anyway, since all this is about efficiency. Are cobs more efficient than 3w diodes?

EDIT: where's the spectrum graph for the 2700k? I only see the 3000.
 
captainmorgan

captainmorgan

Well-Known Member
RedCarpetMatches said:
I've had great fat trich heads with UVB CFLs! Coulda been the strain. I've read that they produce more trichs for protection from harmful rays. I need a refresher course on the matter.

Anyway, since all this is about efficiency. Are cobs more efficient than 3w diodes?

EDIT: where's the spectrum graph for the 2700k? I only see the 3000.
Click to expand...
Gotta love the Marijuana Man

https://www.youtube.com/watch?v=lfiI78uN3Ks
 
SupraSPL

SupraSPL

Well-Known Member
I saw that a long time ago and it convinced me to try UVB. It turned my trichs brown which I don't prefer and there was no magical increase in potency unfortunately.

Redcarpet the most efficient small white LED that I know of is the Cree XM-L2 U2 4C (4400K). It is 45.5% efficient at 1A (3W) and cost $1.52/Watt. Very impressive but the color temp is not ideal for growing IMO.

So for warm whites, the Cree XM-L2 T4 7A3 (3000K) is 36% efficient at 1A (3W) and cost $1.61/Watt. The Cree CXA3070 3000K that we have available to us is 42.5% efficient at .7A (25W) and cost $1.76/Watt.

So in regards to warm white, the CXA3070 COB is much more efficient than the XM-L2. The COB is also much more convenient to install.
 
You must log in or register to reply here.
Top