my 3 stages of flower

natec631

Member
Ok, new question. I bought a couple chillers to help with my res temps but not sure how I should connect them as they need pumps. Should I use the pump that supplies the sprayers or get an additional pump(s)?
 

waterdawg

Well-Known Member
Ok, new question. I bought a couple chillers to help with my res temps but not sure how I should connect them as they need pumps. Should I use the pump that supplies the sprayers or get an additional pump(s)?
I would get an addition pump and run it using a SS coil in the res. keeping the chiller as a closed loop system. Not saying that is the best way fyi, just how I would do it. The pump capacity would not have to be very large. I work on large chillers and geothermal systems so a bit different but just bigger lol. Does your chiller cycle using a separate temp sensor? The delta t of the water flow through the chiller should be adjusted by valve to achieve max efficiency and will add to longevity of unit.
 

Toaster1

Member
Hey SS,
I know you run botanicaire and it works great, but I was wondering if you have ever tried synthetic nutrients in any of your systems? I can't find many references of anyone using synthetic nutrients in the these systems. I am currently experimenting with GH, Advanced Nutrients and Dutch Master in different aero veggers and none of them seem to be working well at all and definitely don't come close to the growth rate when using botanicare. Actually, they all look kind of stalled out and not much growth at all, they just sit there like they do not have any nutrients. Not sure if I am doing anything wrong or what so I thought I would ask if you know of anyone ever doing this. I added airstones to the reservoirs tonight, we will see if that changes anything. Also using tap water, so I am not sure if that makes a difference between organic and synthetic nutes. Tap water with botanicaire works fine of course. Thanks.
 

natec631

Member
Found a great deal(craiglist) on a 1/4 and 1/2 hp chiller. I've got the 1/4 setup and it's working fine on the veg system. Veg totes on a table with drains back to res and the chiller cooling the res. My problem is my flower setup. I've got 2 three rail setups but I've only got one chiller. Really don't want to have to buy another one as this one is a 1/2 hp size and I know its big enough. I was trying to avoid having totes in my tent and just feed the 2 rails from a res outside the tent but my problem is getting the return. How do you guys have your flowering systems setup?
 

superstoner1

Well-Known Member
When I ran a chiller i ran one pump from chiller res to manifold that fed wort chillers in each res then to a return line just making a circuit.
 

natec631

Member
Wasn't meaning the sprayers. I was asking about going from the barb type connectors that come with the pump( and the associated hose) to PVC
 

superstoner1

Well-Known Member
I have never used the fittings that come with pumps. I use the grey thread to barb fittings in lawn irrigation section of plumbing at Lowes. Tons of sizes in different configurations.
 

extremepsi

Well-Known Member
ss
in one of your early posts at the beginning of the thread you mentioned using rubber paint to seal your room, what did you use ?
 
Top