40w/sq ft. is optimal. That's 12 4' tubes (12 x 54w = 648w / 16 sq ft = 40.5w sq ft).Cool. Thanks. How much wattage do i need for a 4'X4' tent do you think?
Thats a lot of lights lol. I'm sure the math is correct but I have a hard time getting 8 in a 4x4 room using 2 4' fixtures. 12 would be quite a light show lol.40w/sq ft. is optimal. That's 12 4' tubes (12 x 54w = 648w / 16 sq ft = 40.5w sq ft).
I have HydroFarm EnviroGro fixtures. Two 6-bulbs (21.8" wide) or an 8-bulb (26" wide) and a 4-bulb (13.5" wide) work.Thats a lot of lights lol. I'm sure the math is correct but I have a hard time getting 8 in a 4x4 room using 2 4' fixtures. 12 would be quite a light show lol.
In that case, I would strive for at least 30w / sq ft, and closer to 40w. If you're growing taller plants (i.e., not autoflowers, you aren't "mainlining" photosensitives into bushes), I'd go for some side fixtures (or use CFL to help out on the sides).No. I am not supplementing. T5's are the only lights I want to use.
The amount of light you supply and the length of the tube determine the size of the garden. Marijuana will grow with as little as 10 watts per square foot of growing area, but the more light you give the plants, the faster and larger they will grow. We recommend at least 20 watts per square foot. ...
The more light you give the plants, the faster they will grow. Near 50w/sq. ft. a point of diminishing returns is reached, and the yield of the garden is then limited by the space the plants have to grow. For maximum use of electricity and space, about 40w/sq. ft. is the highest advisable. Under this much light the growth rate is incredible.
You're calculating cubic feet, not square feet. Don't factor the vertical space.my tent is 4x4x6.5 feet. This is 104 square feet. 104x30w=3120w? That sounds like a lot of wattage. How many of the 4' bulbs would i need to get that much wattage?
Okay. Thanks. So a total of 16x40=640w. Is this correct? 640 total watts?You're calculating cubic feet, not square feet. Don't factor the vertical space.
In a prior post I said you need 12 4' tubes. T5ho is 54w per tube. 12 x 54w = 648w. Your tent is 4x4, which is 16 sq ft. Or, 648w / 16 sq ft = 40.5 w / sq ft.
PS: When you reply, if you quote the person you're replying to, they'll receive an alert that you replied, so they know they should return to a thread.
4' long T5HO tubes are 54w. So, 12 of those is 648 total watts. Divide that by your square footage (4x4 = 16 sq ft) and you have an average 40.5 watts per sq. ft.Okay. Thanks. So a total of 16x40=640w. Is this correct? 640 total watts?
I did use LED for my first grow. The light was only a 200w full cycle. It produced some tasty buds. However they could of been so much better with a bigger light, like a 440w. I sold my LED light planning on upgrading to a 440w. when i went to buy it the price went up like $500. They cost a total of $899 for a 440w solar storm. I wish i bought mine earlier. Anyway, I think i can get a pretty solid lighting system for less than that. This is why i want to switch to T5's. They do not get as hot than other HID lights also.4' long T5HO tubes are 54w. So, 12 of those is 648 total watts. Divide that by your square footage (4x4 = 16 sq ft) and you have an average 40.5 watts per sq. ft.
You're going to spend $300 on two EnviroGro 6-tube fixtures (plus more for some 3000k warm tubes for flower). More if you buy SunBlaze 2-tube fixtures (or 1-tube fixtures for more flexibility in placement, such as side lighting.). From my own experience, I think you'll upgrade to LED or HID soon. The T5 investment won't be wasted. You'll be able to use them at least for veg.
You might consider LED now. Even if it's just a couple 2x2' (footprint) lights that you could supplement with T5.
Good luck.
Too bad you got rid of the LED. Supplementing it with T5 would have been the best of both worlds.This is why i want to switch to T5's. They do not get as hot than other HID lights also.
I love LED. You are right about california light works and their prices. After doing some research I am leaning towards HPS an MH. Do you think 600watts would be good enough for a 4x4 tent? I am looking at this: http://www.amazon.com/Apollo-Horticulture-GLK600LS24-Digital-Dimmable/dp/B005ECZQTY/ref=pd_sbs_lg_2?ie=UTF8&refRID=0AS4Z7M202DN2MEGYQ9QToo bad you got rid of the LED. Supplementing it with T5 would have been the best of both worlds.
I'm running 3 brands of LED and I don't think they're as hot as HID. Never been near a California Lightworks, but I know from their specs they drive their LEDs at a higher wattage. For example, TopLED runs less than <50% capacity. Cali Lightworks at full spectrum is 72%.
I never recommend Cali Lightworks. For the money I believe there are better choices. Cali inflates their PAR figures, keeps their spectrum secret (a marketing gimmick), drives fewer bulbs hotter. I would go with Area 51 for lifetime warranty, or a direct-from-China import (avoiding the expensive rebrands which seem to dominate the expensive domestic brands).
Anyway, a mix of LED and t5 would have been good. Just be careful going total t5. Look at the "mainlining" tutorial on growweedeasy. Keep your plants shorter, fatter. I did that when I grew t5 and I still felt I wasn't getting the penetration I wanted.
LEDs aren't perfect. I'd like to do LED supplemented with t5, but my climate is too warm right now.
I've totally ditched my 400 and 250mh, I only use T5's for Vegging now.. I just got them like 3 weeks ago, and the growth in comparison to my 250mh is astounding.My first hydro run was under a 400 hps and I did really well with 400+ grams of White Russian in a 4x4 area. I now run a 600 with 8-T5 HO's. And always use T5's for vegging, they work well.