DiY LED - Cree CXA3070

1947 Boy

Member
cxa3590.png

Hey Supra, could you please do the same calculations for CXB3590, 36V, bin CB, Model:CXB3590-0000-000N0HCB30G

I can get these from Jerry ([email protected]) for $48.50
I would like to compare them to CXA3070 if it makes sense going with 3590.

Thanks
 

CellarDweller

Well-Known Member
It doesn't look like the metal feet are on firm ground, I had to redo 1 of mine and rotate it a little bit so that the metal and plastic feet ere on solid ground. It is important to do that to make sure it is squarely seated.
I hear you, but if those metal feet are over the edge of the bump then the whole thing sits better, the feet are pressing on the metal, just sitting on the ramp of the bump rather than proud from the upper surface.....much more stable and the COB is very firmly held against the heatsink of the CPU cooler. From a "squarely seated" perspective, it couldn't really be tighter and there is no movement when I try and twist or pull the chip holder. It was my father-in-law's idea to seat them like this, as it really seemed to make a difference to how well the COB was pushed up against the heatsink.
 

Uzzi

Well-Known Member
Does anyone know if 240v mains power supply is going to give one HLG-120h-C1050 running a two CXB3590's an issue? I asked Jerry from Kingbrite if he could suggest a driver supplier And he responded that he could not because of our mains voltage! Seems odd to me as our mains power is within the input range of the aforementioned driver? Maybe Jerry just couldn't be arsed when it wasn't going to make him any money? Anyway I have two on the way from Mouser (I had in my head they didn't ship over here for some reason:/) and just hoping I haven't wasted my money!! Any help appreciated. Cheers Uzzi
 

EfficientWatt

Well-Known Member
No worries, it will work just fine.

HLG-120 driver support input voltage of : 90 ~ 305VAC

Anyway, 240V is within the 230V norm :

from wiki : https://en.wikipedia.org/wiki/Mains_electricity

Voltage levels :

Most of Europe, Africa, Asia, Australia, New Zealand and most of South America use a supply that is within 6% of 230 V. In the UK and Australia[3] the nominal supply voltage is 230 +10%/−6% to accommodate the fact that most supplies are in fact still 240 V.

Does anyone know if 240v mains power supply is going to give one HLG-120h-C1050 running a two CXB3590's an issue? I asked Jerry from Kingbrite if he could suggest a driver supplier And he responded that he could not because of our mains voltage! Seems odd to me as our mains power is within the input range of the aforementioned driver? Maybe Jerry just couldn't be arsed when it wasn't going to make him any money? Anyway I have two on the way from Mouser (I had in my head they didn't ship over here for some reason:/) and just hoping I haven't wasted my money!! Any help appreciated. Cheers Uzzi
 
Last edited:

medicinehuman

Well-Known Member
I hear you, but if those metal feet are over the edge of the bump then the whole thing sits better, the feet are pressing on the metal, just sitting on the ramp of the bump rather than proud from the upper surface.....much more stable and the COB is very firmly held against the heatsink of the CPU cooler. From a "squarely seated" perspective, it couldn't really be tighter and there is no movement when I try and twist or pull the chip holder. It was my father-in-law's idea to seat them like this, as it really seemed to make a difference to how well the COB was pushed up against the heatsink.
The feet are all supposed to be on a flat surface with no wobble. It's in the manufacturers instructions. It'll probably be OK. Just thought that I'd mention it.
 
Last edited:

Uzzi

Well-Known Member
No worries, it will work just fine.

HLG-120 driver support input voltage of : 90 ~ 305VAC

Anyway, 240V is within the 230V norm :

from wiki : https://en.wikipedia.org/wiki/Mains_electricity

Voltage levels :

Most of Europe, Africa, Asia, Australia, New Zealand and most of South America use a supply that is within 6% of 230 V. In the UK and Australia[3] the nominal supply voltage is 230 +10%/−6% to accommodate the fact that most supplies are in fact still 240 V.
Thanks mate I thought this was the case! Guess Jerry prob fields questions like that all the time and just couldn't be bothered. Thanks!
 

beppe75

Well-Known Member
Shipped from USA.

Quite unbelievable really. I bought 8 COB holders first. Total value around $16/$17 then 8 reflector adaptors in a separate order...for a similar value. Total shipping $0!!!

Can't get my head around it. Arrow EU don't do the low quantities.
Hey Cellar i think you were lucky man because arrow now charges a godd 44$ for shiping the ideal cob holders to eu...
at least where i live :
MPN: 50-2100LN

MFR: Ideal Industries
Holder Adaptor, LEDiL Lena/Lenina

Ship from: US
Est. Ship Date: 15/04/2015
Est. Delivery Date: 17/04/2015
MPN: 50-2234C

MFR: Ideal Industries
Chip-Lok Holder, Cree CXA30

Ship from: US
Est. Ship Date: 15/04/2015
Est. Delivery Date: 17/04/2015
Use own shipping account
Account # (required)
Select a Shipping Method
Order Summary
2 items $12.03
Shipping $43.99
Tax $0.00
Order Total $56.02


What a pitty...:cry: thought it was good to share.
 

CellarDweller

Well-Known Member
Hey Cellar i think you were lucky man because arrow now charges a godd 44$ for shiping the ideal cob holders to eu...
at least where i live :
MPN: 50-2100LN

MFR: Ideal Industries
Holder Adaptor, LEDiL Lena/Lenina

Ship from: US
Est. Ship Date: 15/04/2015
Est. Delivery Date: 17/04/2015
MPN: 50-2234C

MFR: Ideal Industries
Chip-Lok Holder, Cree CXA30

Ship from: US
Est. Ship Date: 15/04/2015
Est. Delivery Date: 17/04/2015
Use own shipping account
Account # (required)
Select a Shipping Method
Order Summary
2 items $12.03
Shipping $43.99
Tax $0.00
Order Total $56.02


What a pitty...:cry: thought it was good to share.
Oh dear - that's rather pants
 

bizfactory

Well-Known Member
Hey Cellar i think you were lucky man because arrow now charges a godd 44$ for shiping the ideal cob holders to eu...
at least where i live :
MPN: 50-2100LN

MFR: Ideal Industries
Holder Adaptor, LEDiL Lena/Lenina

Ship from: US
Est. Ship Date: 15/04/2015
Est. Delivery Date: 17/04/2015
MPN: 50-2234C

MFR: Ideal Industries
Chip-Lok Holder, Cree CXA30

Ship from: US
Est. Ship Date: 15/04/2015
Est. Delivery Date: 17/04/2015
Use own shipping account
Account # (required)
Select a Shipping Method
Order Summary
2 items $12.03
Shipping $43.99
Tax $0.00
Order Total $56.02


What a pitty...:cry: thought it was good to share.
yo, what reflectors are you going to use with those LEDiL adaptors? I might want to do the same.
 

the dopest

Well-Known Member
Is there a product characterization tool for the CXB like there is for the CXA lights? I can't seem to find anything. Just wondering how much more efficient the CXB are over the CXAs.
 

beppe75

Well-Known Member
yo, what reflectors are you going to use with those LEDiL adaptors? I might want to do the same.
well.. to be sincere Biz i wanted to use the ideal holders... and i just wanted to have the ledil adaptors in hand for any further improvement but i have not decided anything yet... i plan to run a tent so probably i would not even need the reflectors but i wanted the adapters just in case... you know.
 

beppe75

Well-Known Member
by the way ... does anyone know where to buy the ideal reflectors on eu sites....
or what kind of other holders i can use for the cxb3070 and cxb3590?

"Also what is the general consensus on reflectors and lenses? What is a good viewing angle to look for?"
To Biz... i cant really help you on this, i know some other guys have made some tests and have much much more experience regarding reflectors...
i have to buld my first GrowLed yet;)
 
Top