Shakes/Tremors From Dabs

TheTrippyHippie

Well-Known Member
Hey, I was wondering if you guys ever get the shakes and tremors from doing dabs. SOmetimes i think i trick my mind into thinking I did something else like Acid or something idk
 

7mend07SweetnSticky

Well-Known Member
Smoking weed is known to drop blood pressure and blood sugar. Next time it happens eat something sweet and see if that helps
If it does, smoking dabs causes your body to lose sugars.
Some strains also increase your metabolism, which increases energy production .
I kinda got shakey today after some dabs, but I drank an entire 12oz redbull. I noticed that when I drink a redbull and dab I get jittery but that's because I'm loading up on energy with the redbull. Hope this helps.
 

hyroot

Well-Known Member
Stop smoking dirty bho that's not properly made. Unless you see a test stating it 0 ppm's don't smoke it.

The ridiculous amount of chemicals leave crystallized deposits in your lungs.

While dabbing it's like nos cutting off oxygen to your brain causing you to shake or fish.

Unfortunately of all the people that make bho. Only a small handful if people actually make it properly.
 

hyroot

Well-Known Member
And those handful should get top dollar....come on man the shit isn't rocket science, I bet a retard could make it...
Its not rocket science. But most people don't have the money for the proper equipment to make proper bho

1. High end food grade butane by the gallon . Never use cans
2. Dry ice
3. 190 proof alcohol
4. Vacuum oven
5. Vacuum pump
6. Closed loop system
7. Dry ice chamber
8. Distiller
9. All the little nic nacs, parchment, fliters, screens, gloves,

10. Room filter
11. Dehumidifier
12. A/c, A ventilated clean room at 65 degrees.
13. Fire suppression

Not counting the room it's around $10k for the right setup. If you're blasting a lot you want more than one vac oven or the larger ovens which run $2k -$7k just for the oven alone.

If you don't have this equipment. In no way should you be making bho.

Anyone that open blasts is a fucking idiot and deserves to get blown up for being so stupid.

Smoking dirty bho can cause pulmonary fibrosis and small cell carcinoma disease.
 

Bublonichronic

Well-Known Member
A serious question, what's the difference between a expensive vac oven and a simple chamber that can reach the same vac...I see a lot of people say u need s vac oven, I think that's bullshit...then the whole open blasting thing it's dangerous but how does it effect the end product if ur using "food grade" butane and wingerizing
 

Bublonichronic

Well-Known Member
Don't get me wrong I'd like to have all that shit and pretend I'm Heisenberg but to say it's all neasicary to make clean bho I think is a gross overstatement at best..I guess the distiller is needed to clean your butane? but even then 10,000$ is just silly
 

hyroot

Well-Known Member
A serious question, what's the difference between a expensive vac oven and a simple chamber that can reach the same vac...I see a lot of people say u need s vac oven, I think that's bullshit...then the whole open blasting thing it's dangerous but how does it effect the end product if ur using "food grade" butane and wingerizing

About a 100 ppm's . You won't purge for shit with one of those chambers.. Your finished bho product should always be at 0 ppm's. That won't happen without a vac oven. You need to purge for 3 to 5 days straight.
 
Last edited:

hyroot

Well-Known Member
Don't get me wrong I'd like to have all that shit and pretend I'm Heisenberg but to say it's all neasicary to make clean bho I think is a gross overstatement at best..I guess the distiller is needed to clean your butane? but even then 10,000$ is just silly

A closed loop system is $2500 and the new vac ovens alone are around $4,000.

The distiller is the cheapest thing. Then overhead to process cost quite a bit too.

All are a must for bho. No half assing it.

Rosin is cheaper and easier to produce and far better.
 

Bublonichronic

Well-Known Member
A simple vacuum chamber, with proper heat and vacuum will do the same things a vacuum oven can.
About a 100 ppm's . You won't purge for shit with one of those chambers.. Your finished bho product should always be at 0 ppm's. That won't happen without a vac oven. You need to purge for 3 to 5 days straight.
Unless FD is fuckin with me or it's a known thing that most chambers won't reach the same level of vac as a oven(or atleast enough r if a difference to determine the effectiveness of the purge)that discredits what you say about the need for a oven, that knocks off half the estimated cost right off the bat...hmm what els is more of a luxury then nessecity...but whatever I don't really care I hardly make the shit anymore except on request
 

CBDFarm

Well-Known Member
The ovens and chambers will do the exact same thing as long as you apply the same method. Most even basic vacuum chambers with reach 30hg... More then enough... The ovens are better in some aspects as you can run 3 batches(give or take depending on brand) at the same time with the racks. Chambers you can run only as much as you can fit in the base, and the biggest one is a 5 gallon, which I think is better for personal use. So it comes down to are you going to be selling in large quantities to clinics or personal use?

Some of my work with a basic chamber set up.

First round of purging, looks like it's pulling everything, chambers look like they put in work to me....




Trim run




Some White Widow




So all in all, get a chamber unless you plan on doing huge runs,frequently to cover the cost.
 

hyroot

Well-Known Member
The ovens and chambers will do the exact same thing as long as you apply the same method. Most even basic vacuum chambers with reach 30hg... More then enough... The ovens are better in some aspects as you can run 3 batches(give or take depending on brand) at the same time with the racks. Chambers you can run only as much as you can fit in the base, and the biggest one is a 5 gallon, which I think is better for personal use. So it comes down to are you doing to be selling in large quantities to clinics or person use?

Some of my work with a basic chamber set up.

First round of purging, looks like it's pulling everything, chambers look like they put in work to me....




Trim run




Some White Widow




So all in all, get a chamber unless you plan on doing huge runs,frequently to cover the cost.

Have you had your bho tested for contaminants?

Proof is in the lab tests. You can't see the see all the chemicals. Just because you see bubbles doesnt mean all the chems are gone. You cant see benzene, propane propellants, hydrocarbon propellants, propane, cyclopropane dimethylmethane, freon, propylhydride, trimethylene, methylpropane, petroleum,
 

CBDFarm

Well-Known Member
Have you had your bho tested for contaminants?

Proof is in the lab tests. You can't see the see all the chemicals. Just because you see bubbles doesnt mean all the chems are gone. You cant see benzene, propane propellants, hydrocarbon propellants, propane, cyclopropane dimethylmethane, freon, propylhydride, trimethylene, methylpropane, petroleum,
Yes I do, but I am not going to respond to you anymore hence why I didn't quote you in my first post, as you are obviously a wax snob, and I don't have time for people like that. So have a good one buddy :)
 
Top