12/12 From Seed Experiment - 21 Strains

Alaric

Alaric

Well-Known Member
Super---- HDS,

I like to take a sampling of buds at different stages when they get that far along to compare the smoke characteristics.
(and in a hurry to try any new strain)

Ahhhh------that first article smoke.:bigjoint:

I hope I'm wrong -------I guesstimate between 2.0-3.0 lbs.

A~~~
 
drudigger

drudigger

Well-Known Member
Hot Diggity Sog said:
Haha...really? Very kind words...thank you.
Click to expand...
Yea, I'm really excited to see your weigh in on the finish, and everyone chiming in with their help has been so informative for me its ridiculous, even in the beginning the post with 700ppm equaling 1ec was something i never knew before so even from the beginning this has been a very nice ride, thanks so much.
 
Hot Diggity Sog

Hot Diggity Sog

Well-Known Member
Just a quick update. I harvested a few branches today...a couple CT's, 1 blue dream and a few small C99 branches. The majority of the harvest will take place next week.

The Skunk #1's for chapter 4 are doing well. Will get some pictures of them tomorrow.

I made some significant purchases over the last few days and wanted to share them:

Ballasts: I have been running a variety of different ballasts and have decided to upgrade to Solis-Tek exclusively. What can I say...they rock. They have been the most reliable ballast out of the numerous I own.

Bulbs: Going to be doing a TON of experimenting this next chapter. I just received (2) Solis-Tek 10K Metal Halide bulbs and I put them in right before lights out in the current octagon. Good news and bad news. Good news is they are incredibly bright and the blue color is awesome. Bad news is they are HOT. Assuming I can manage temps, I will run these 10K bulbs for the remainder of chapter 3.

I also just ordered new Hortilux Super HPS bulbs as well as as Solis Tek 6K MH bulbs. My plan for chapter 4 is to run the 6K MH during veg, then the Super HPS during flower and finish the last 10 days with the 10K MH. I will probably experiment with running a super hps with a 6K MH during flowering and rotate their position every couple of days.
 
Hot Diggity Sog

Hot Diggity Sog

Well-Known Member
Hey everyone,

Sorry it has been so long since I posted updates. Chapter 3 came to a successful conclusion. I promise I will post bud pics soon. I have no idea what the final yield was but will let you know when I do.

Chapter 4 preparations are going great. The new octagon is assembled and I just did my first water test and it went great. No leaks and pretty consistent water depth in all of the tubes.
The Skunk #1 seeds are doing well. Tomorrow they will be 2 weeks old and I hope to move them into the Octagon on Thursday.

Here are some pictures of the new setup. The only major last minute change was to do 3 rows instead of 4. I kind of wimped out and was nervous that I would not have enough light for 4 rows.

20150920_113027.jpg 20150920_113042.jpg 20150920_113049.jpg 20150920_113100.jpg 20150920_113115.jpg
 
Alaric

Alaric

Well-Known Member
Hey HDS,

Is there a reason you used the clear tubing? ------gonna get algae.

Based on your last run----are you concerned about roots clogging the small pipe between the tubes?

I hope you're very pleased with the final weight.

rock on,

A~~~
 
Hot Diggity Sog

Hot Diggity Sog

Well-Known Member
Alaric said:
Hey HDS,

Is there a reason you used the clear tubing? ------gonna get algae.

Based on your last run----are you concerned about roots clogging the small pipe between the tubes?

I hope you're very pleased with the final weight.

rock on,

A~~~
Click to expand...
Clear was all I could find of that size. I'll be wrapping reflectix around it...just wanted to 1st show what it looked like.
 
Alaric

Alaric

Well-Known Member
Hot Diggity Sog said:
I'll be wrapping reflectix around it...just wanted to 1st show what it looked like.
Click to expand...
Cool-----or you could use pipe insulation.

A suggestion/s:

On the lower ends of your tubes (direction of water flow) use a hole saw or something to make an opening large enough to get your hand into-----in case of root clog.

Also, if clogs become too big of a problem------you could go back to the Ls between tubes.

Have you decided how many plants and what size for next run?

A~~~
 
Hot Diggity Sog

Hot Diggity Sog

Well-Known Member
Alaric said:
Cool-----or you could use pipe insulation.

A suggestion/s:

On the lower ends of your tubes (direction of water flow) use a hole saw or something to make an opening large enough to get your hand into-----in case of root clog.

Also, if clogs become too big of a problem------you could go back to the Ls between tubes.

Have you decided how many plants and what size for next run?

A~~~
Click to expand...
I'm not too concerned with root clog. The drain on the first version was a 1 inch and these transitions and drain are 2 inch. The roots grew into into the 1 inch drain and extended about 2 feet but caused no noticeable issues. The clear tubing I'm using now can easily be removed and put back on. It's not siliconed or anything like that.

This run is using fewer plants and giving them much more room. 16 1/2" between each row...up from 11 1/2". 3 plants per row per side instead of 5...approx 8 inches of space between plants.
 
cc2012

cc2012

Well-Known Member
Meanwhile down in HdS underground Laboratory the Mad Prof had bean rather busy of late..

Like something outta of a Sci-Fi Movie HdS, Kudos on the Build Skill.. looks pretty slick and clean..

keep expecting to see a Flux Capacitor pop up in a picture.. Roll on the Next Round!!

atb
 
green217

green217

Well-Known Member
Hot Diggity Sog said:
Hey everyone,

Sorry it has been so long since I posted updates. Chapter 3 came to a successful conclusion. I promise I will post bud pics soon. I have no idea what the final yield was but will let you know when I do.

Chapter 4 preparations are going great. The new octagon is assembled and I just did my first water test and it went great. No leaks and pretty consistent water depth in all of the tubes.
The Skunk #1 seeds are doing well. Tomorrow they will be 2 weeks old and I hope to move them into the Octagon on Thursday.

Here are some pictures of the new setup. The only major last minute change was to do 3 rows instead of 4. I kind of wimped out and was nervous that I would not have enough light for 4 rows.

View attachment 3504054 View attachment 3504055 View attachment 3504056 View attachment 3504057 View attachment 3504058
Click to expand...
impressive!
 
Alaric

Alaric

Well-Known Member
Hot Diggity Sog said:
I'm not too concerned with root clog. The drain on the first version was a 1 inch and these transitions and drain are 2 inch. The roots grew into into the 1 inch drain and extended about 2 feet but caused no noticeable issues. The clear tubing I'm using now can easily be removed and put back on. It's not siliconed or anything like that.

This run is using fewer plants and giving them much more room. 16 1/2" between each row...up from 11 1/2". 3 plants per row per side instead of 5...approx 8 inches of space between plants.
Click to expand...
Good-----no worries about clogs-----didn't realize those were 2". When I first saw those I wondered if they were for inspection.

IMO, good move for fewer plants----looked like a little crowed before.

A~~~
 
Hot Diggity Sog

Hot Diggity Sog

Well-Known Member
Alaric said:
Good-----no worries about clogs-----didn't realize those were 2". When I first saw those I wondered if they were for inspection.

IMO, good move for fewer plants----looked like a little crowed before.

A~~~
Click to expand...
It definitely was. I started off giving them very little room and have been gradually increasing. It's been tiresome having many of the plants yield next to nothing because they get left behind. Hopefully this will be an improvement.
 
You must log in or register to reply here.
Top