Get 2-5.886" heatsinks from heatsinkusa.com at 32", put 4 cxb3590's/cxb3070's on each, add 2 140mm fans on both bars (4 total) run each bar on an hlg240h-c1750b and vuahlah.Looking something in the $400-500 ish range.
its from Germany, and its about $950usdm. I would look at pacific as a comparison, its less money you get two more cobs and state side support. I don't know exact tec-specs but if I had to bet, I would put money on pacific putting down more PARs.
I am from Portugal so.. everything outside UE cost 30%+. The price of this lights is 500€ delivered directly from their website. The pacific cost 640€+ 30% and i don't think they ship to Portugal. There's an italian guy selling AMARE on europe but it's 2x the price they sell them on US. I am pretty much stuck with this, northerngrow that i believe are from uk, and grownorthern that are also from uk and are launching new line this summer. DIY is not an option.
Sure but I think you might've missed that i'm running a 3x3 tent, not a 4x4So i'm running 90x90cm which is quite a bit far off from 120x120
But yeah, been thinking if you should run veg and flower led's at the same time throughout the grow cycle. Haven't seen much discussion about it.
definitely run both switches. I doubt anyone here would say that's not a good idea.
....I still think you have room for another light in a 3x3 =þ
Swap it if you can afford itI have a 2'x2' grow area. I'm currently using 2 led marshydro 300w (60x5) for the grow area. Should I stick with these or swap to something else to get a bigger yield?
Any recommendations?Swap it if you can afford it
Looking something in the $400-500 ish range.
When I get the light next week, i'll post some pics with my HPS still in place - we'll see who's right
But, wont the P4-XML2 outperform the 400W hps either way? When it comes to spectrum, PAR etc? From what i've read, it equates to a 600W hps when it comes to light.
Another question, how is the penetration of the leds, will buds below the canopy be lacking?
The reason i wanted to go LED was to not have to have a cooling fan and all that added into the system. If i go the DIY way, what COBS should i be getting and at what spectrum?
Maybe hang tight for the new veros. Looking for them in a month or two.The reason i wanted to go LED was to not have to have a cooling fan and all that added into the system. If i go the DIY way, what COBS should i be getting and at what spectrum?
Do you want to run them efficiently or do you want run them hard?The reason i wanted to go LED was to not have to have a cooling fan and all that added into the system. If i go the DIY way, what COBS should i be getting and at what spectrum?
LEDs do run cooler but even the most efficient cobs give off heat. 600 watts of Cree 3070 is the same as running a 300 watt heater.The reason i wanted to go LED was to not have to have a cooling fan and all that added into the system. If i go the DIY way, what COBS should i be getting and at what spectrum?
Would this be a upgrade from what I have?I have a 2'x2' grow area. I'm currently using 2 led marshydro 300w (60x5) for the grow area. Should I stick with these or swap to something else to get a bigger yield?
Would this be a upgrade from what I have?
http://www.tastyled.com/product-p/t2-2100r.htm
Thanks, I just may do that.run them together. and you will be golden.
yes major upgrade. I just upgraded a progro 260 to the same light and in a half hour the new growth was crazy lol. I am getting two more tasty lights soon I am so happy with the first. My old light can collect dust as a backup.Would this be a upgrade from what I have?
http://www.tastyled.com/product-p/t2-2100r.htm