Airwalker16
Well-Known Member
Very cool. When's the Duet gonna be for sale?
Nevergood's high power garden
- Thread starter nevergoodenuf
- Start date
nevergoodenuf
Well-Known Member
Not sure? To be honest, I prefer white. I'm sure you can order them now.
nevergoodenuf
Well-Known Member
nevergoodenuf
Well-Known Member
Going to bed now, but even with screwing up the last few weeks, I have trimmed over 750 gr. from the floor ( 25w/sf ) and the shelf ( 35w/sf) for a total of less than 1200 watts. The veros only did 117 grams minus a joint or 2. Still more to trim, but almost done.
nevergoodenuf
Well-Known Member
Final total for the first 1200 watts was over 915 grams, with 117 of that being the veros (200 watts). The GG is doing good but the OG wasn't as happy and the last ones to go in look horrible, except for the buds.
nevergoodenuf
Well-Known Member
The next run will be less plants in bigger pots netted.
nevergoodenuf
Well-Known Member
. Ummmmm this sample is good
nevergoodenuf
Well-Known Member
nevergoodenuf
Well-Known Member
I still haven't finished all my trimming, but just have small shit to trim up. The whole total was over 4 pounds, but it isn't a big enough deal to get exact #'s. I am still happy with my total, for the first time I don't have to rush plants in to insure I have smoke 3 months down the road.
I have 6 green cracks in 5g bags that I am getting ready for the next test. This one will be more controlled and will be 2 Luna 300 3200k 95cri's running in parallel on an HLG 320h-48b (there will be no dimmer attached) VS. 2 Luna 4000k 80cri's. They are on different heat sinks, but both are .22 C/W. Once I start flowering I will have a divider from heat sink to the top net. This is in my 4'x5' corner. I was going to do a 1000 watts, but that is 50 watts per square foot. Instead 33 sounds better. I will be netting 4 in that area and top feeding the coco (readygrow) twice a day. They are already drinking a lot. I still am not sure what to do with the other 2. But the six OGs I just got will be a vertical grow in the other corner. I am doing those in soil. And one pic to show how bad the ph problem got in the end.
I have 6 green cracks in 5g bags that I am getting ready for the next test. This one will be more controlled and will be 2 Luna 300 3200k 95cri's running in parallel on an HLG 320h-48b (there will be no dimmer attached) VS. 2 Luna 4000k 80cri's. They are on different heat sinks, but both are .22 C/W. Once I start flowering I will have a divider from heat sink to the top net. This is in my 4'x5' corner. I was going to do a 1000 watts, but that is 50 watts per square foot. Instead 33 sounds better. I will be netting 4 in that area and top feeding the coco (readygrow) twice a day. They are already drinking a lot. I still am not sure what to do with the other 2. But the six OGs I just got will be a vertical grow in the other corner. I am doing those in soil. And one pic to show how bad the ph problem got in the end.
nevergoodenuf
Well-Known Member
I finished cleaning and netting 4 of the six. The other 2 I still haven't decided how many watts to put over them. The netted 4 have 4 Luna 300s running on 2 HLG320s. The divider will go up as soon as I start flowering.
nevergoodenuf
Well-Known Member
@Growmau5 -I will as soon as I get the updated info. Old #'s look kind of sad. I requested info for the Luna 300 @ 250 along with temp and some other info. This is the company that sells the Duet 2400 watt COB. The heat sinks are right on with their data sheet. I am trying do get a DIY display going at my friends store, but at the moment only plan on having HLG-240/320/600's with the Luna 300 on their 320w heat sink in different temps. He is in the Bay Area and doesn't do mail order. This COB doesn't care if you run them in Parallel, and the COB will have screw in connections, so stupid simple. Their website is a work in progress (it sucks right now), but it will give you some idea of there products.
http://www.fcopto.com/luna-series/
http://www.fcopto.com/luna-series/
nevergoodenuf
Well-Known Member
And DON'T look at my zip ties
Malocan
Well-Known Member
@nevergoodenuf
today i did the phonecall, was a friendly woman at phone. She told me the msc-15 cost "only" 1200euro.
I asked her how often i need to recalibrate the msc-15, she said every 1-2years , it depends how accurate i need my measurement. Calibration cost around 300 euros.
It takes around 3-4 weeks until they deliver(after you paid) it.
And she told me, they sell only from business to business (from company to company), i asked why?
She said the reason is the warrenty, they make only 1 year warrenty. Electronic products for privat people need to have longer warrenty in europa(but im not sure about that)
today i did the phonecall, was a friendly woman at phone. She told me the msc-15 cost "only" 1200euro.
I asked her how often i need to recalibrate the msc-15, she said every 1-2years , it depends how accurate i need my measurement. Calibration cost around 300 euros.
It takes around 3-4 weeks until they deliver(after you paid) it.
And she told me, they sell only from business to business (from company to company), i asked why?
She said the reason is the warrenty, they make only 1 year warrenty. Electronic products for privat people need to have longer warrenty in europa(but im not sure about that)
nevergoodenuf
Well-Known Member
Wow, much cheaper than I expected. Thank Malocan.
nevergoodenuf
Well-Known Member
Ok, I thought I got the pump and timer working, but because my res is off the ground it causes a siphon affect. So the first morning 4 of my plants got watered with 40g. I have got the CO2 running again and will switch to 12/12 tomorrow. The other 2 I might veg longer, but will get 500 watts over the 2 of them. No more signs of mites, but will wipe down the walls and floor one more time with some bleach/water. I still need to take my multimeter to the Minisplit computers to find out which one I fried, not that I need AC. The new 8" Hyperfans work great @ 75 watts each. The intake fan is only running at 1/3 power, maybe. I do need a new filter, though. The sensor for the fan/CO2 temp/humidity controller is sitting in the middle of the canopy and stays at 80*. The net is full but I still have to make the divider. I still see NO difference between 4000k/80cri and 3200k/95+cri, maybe LESS stretch from the high CRI? You be the judge.
nevergoodenuf
Well-Known Member
CRI SHOOTOUT- I expected to see the 4000k stretch more that the high cri, but it looks like they are staying more compact under the high cri, otherwise they are nearly identical. The divider is up and tomorrow will change the timer to 12/12.
The other 2 I might put one under 250 and the other under 320? They are getting bigger than any plant I have run indoors. I will listen to any thoughts on these 2 plants, as to how to setup.
The other 2 I might put one under 250 and the other under 320? They are getting bigger than any plant I have run indoors. I will listen to any thoughts on these 2 plants, as to how to setup.