AlphaPhase
Well-Known Member
They go in the tube not over, I'll get a pic of what I use hang on a minSo just cut some tube, get a 1/2" end cap and slip it on? It holds?
They go in the tube not over, I'll get a pic of what I use hang on a minSo just cut some tube, get a 1/2" end cap and slip it on? It holds?
Lights on only? This timer is confusing. Directions don't really say muchThey are 3/4"
In flower every 3 hrs to start, every 2 hrs full bloom, every 3 hrs late flower r
Looking good man, nice space. I highly recommend adding this to the walls:Got the room set! Trellis together, lights up, buckets together, res filled, test run complete, just need to add the plants tomorrow, wish me luckif they get too big I'll flower the other batch, I should know within the first 10 days if it won't be manageable, but I'm hoping my ninja training skills work out
View attachment 3699226
Are your buckets sitting higher than your res? If not, they won't drain back to the res. I always kept my res about 2-3 inches below the pots and it worked great.So I ran into a problem for the test run. The buckets are not draining and filling. They do when I lift up the controller bucket so that the tubing isn't uneven going through the tent hole. I'm guessing this is because of the unevenness of the tubing? Did you have to cut a hole at the bottom of the tent for the tubing to stay even across the ground?
I get the fittings online, only place I can find themHardware store sells those?
With suspended pots I flood 1 time lights off, if not suspended I don't flood lights offLights on only? This timer is confusing. Directions don't really say much
Thanks brother, I'll definitely use some reflective material when I move, just trying to keep things minimal here because one minute I think I'm moving and the next I'm not lol. I may go with flat white paint though when I move for the ease and no moisture barrier behind the film /wall. Whatevers clever at the time (I can't fucking wait to built a new room lol)Looking good man, nice space. I highly recommend adding this to the walls:
http://www.easy-grow.co.uk/products/reflective-sheeting/diamond-lightite/ (or similar thickness and structure). Pricey but will earn it back easily in a single run with that space.
Thanks bro, the house hunting makes me want to shoot my face off lol. It's so much harder in this county than it was in NY, so many sketchy houses that look OK but once you start digging in deeper they are 100% over priced and falling apartLooks amazing!
What is the house progress?
Remember - 2006 might have Chinese drywall.
Yeah, I cut small hole the size of the tubing in the tent, since the buckets work with gravity, the tubes need to be mostly flat on the ground to drain back to the resSo I ran into a problem for the test run. The buckets are not draining and filling. They do when I lift up the controller bucket so that the tubing isn't uneven going through the tent hole. I'm guessing this is because of the unevenness of the tubing? Did you have to cut a hole at the bottom of the tent for the tubing to stay even across the ground?
The timer I flood every 1.5 hrs with suspended pots and every 3-4 hrs with the buckets filled with medium, more roots =more floods, I like to have a nice root mass before flower then let it ripThink I fixed it. Had to cut a hole in bottom of the tent because the lines were slightly raised having to go through the vent.
Another thing was hydrofarm put the bigger barbs on the controller bucket. Had to take them out and insert the smaller ones for the right fit for the tubing. Then 5 gal version must have bigger lines.
Now I have to figure out this timer....
Thanks brother I finally got it out of my head that finding a place that will work won't be so easy, realized it'll take some time and that's OKGreat to have you back bro, sorry to hear about all the stuff around with houses thoughI'm sure something will come along when you are 100% ready!! Good things come to those who wait
![]()