show and tell about your automated drip/sprayer systems

MaiNiaK420

Well-Known Member
I'm not sure of the exact size off the top of my head. I'm guessing around 1,500 GPH.
It's way bigger then what we need (hence the relief valve setup) but I already had 3 of these pumps.
image.jpeg

There is a link to my build in my signature below if anyone is interested.
 
Never heard of this bro. Do you have a link to 1 you know works?
Don't go with bluelab, it is a waste of money and if anything went wrong with either the pump or the controller, you will need to replace the whole thing.
I found out Milwaukee makes a very good one. The whole set MC720 (MC122 controller + MP810 pump) on eBay is under $200 shipped while bluelab is all in one unit over $300+. Milwaukee also have the pump MP810 sold separately. Their price is very reasonable. I've been using 4 sets for about a year and non of them have any problem.
PS: They supply 2 hose for PH in and out from the pump. The hard hose is hard to use and I replace it with a blue air hose (3/16") and it work just fine with no problem.
 
Last edited:

ttystikk

Well-Known Member
Don't go with bluelab, it is a waste of money and if anything went wrong with either the pump or the controller, you will need to replace the whole thing.
I found out Milwaukee is best for the money. The whole set MC720 (MC122 controller + MP810 pump) on eBay is under $200 shipped while bluelab is all in one unit over $300+. Milwaukee also have the pump MP810 sold separately. Their price are very reasonable. I've been using 4 sets for about a year and non of them have any problem.
PS: They supply 2 hose for PH in and out from the pump. The hard hose is hard to use and I replace it with a blue air hose (3/16") and it work just fine with no problem.
Much appreciated, thank you!
 

Chillin chillin

Well-Known Member
Don't go with bluelab, it is a waste of money and if anything went wrong with either the pump or the controller, you will need to replace the whole thing.
I found out Milwaukee makes a very good one. The whole set MC720 (MC122 controller + MP810 pump) on eBay is under $200 shipped while bluelab is all in one unit over $300+. Milwaukee also have the pump MP810 sold separately. Their price is very reasonable. I've been using 4 sets for about a year and non of them have any problem.
PS: They supply 2 hose for PH in and out from the pump. The hard hose is hard to use and I replace it with a blue air hose (3/16") and it work just fine with no problem.
I'm afraid if I make it any more animated they may think they don't need me anymore.
 

Chillin chillin

Well-Known Member
no worry, you can come to me, lol.
The thing I love most about this besides the simplicity of it all after (once you get a grasp, which I'm sure you have) is you can take the trade anywhere you go.
Hopefully will not need to jump ship ( pre ico ship) but if it ever sinks I may hit you up bro
 

JayThe HydroGuy

Active Member
a little LED top drip coco with an octa bubbler. Two 225w each/450w total led ufos, so actually wattage is probably around 150w each/300w total. Tester strain Alleged Grapist. Flipped her into flower at 8 inches. Shes doing well under minimum wattage, cant wait to see what she does under double enders.led top 2.jpg 20160617_132815_resized.jpg
led top.jpg led top.jpg
led drip.jpg
led octa bubbler.jpg
 
Last edited:

Aeroknow

Well-Known Member
@ttystikk what is the difference between tupur and coco? is it a type of coco? i searched it and checked out the royal gold.
I buy it by the pallet. It's good shit;-)
Very clean right out the bag. No need to break it up. Zero clumps, it's ready to go, which is what I love the most about it.
Watch out though! You might end up getting two per light if you use the stuff as the name implies. I heard they're coming out with a new coco-blend called threepur soon also:-)
 
Top