Introducing CobKits.com - specializing in DIY and Citizen COBs

Dereek511

Member
I see you restocked cxm22 pieces.
Ive been reading for some good time and am hoping for a small nudge from you cobkits.
I would like to start with 4 cxm22 3000k 90 cri cobs 133mm passives and really looking for a driver recommendation. I found one from Sagar Power systems (?)

Hlg-320h-c1400b. If theres a better option, im all ears.
Really id likely add more bars in the future, but i know you gotta start somewhere.

Thanks for the input.
 

Dereek511

Member
thats a good choice. that or 320-48A

just updated inventory, i have 3 of the 1400B
Alright cool,
With that 1400b, i shouldnt need any additional resistors or dimmers right?
With a frame i should be able to set it up and go?
Edit, doing more reading on resistor/potentiometers.
 
Last edited:

kaivorth

Active Member
Picture with my COB setup late veg.

I started SCROG really late, but she's starting to adapt. Anything look wrong here? First decent grow.

This look about the right time to flip the switch? Going to trim up more under brush, and just let her go I guess?

Nutes: Maxibloom, Silicon Blast, occasional Cal Mag

I'll probably start a grow journal of before and after the flip.
 

Attachments

CobKits

Well-Known Member
hey guys i need to travel for some family business

orders in by noon pst monday(ish) will ship monday, after that will ship thurs

ill put a notice up on site for non-forum peeps at that point, but just wanted to give heads up to riu'ers
 

thccbdhealth

Well-Known Member
What would you recommend to complement a 3100k Philips cdl.
in a 4x4 x6'6
Im wondering about 2700k to mimic hps but more energy efficient ?
 

thccbdhealth

Well-Known Member
That's what my first thought was.
20" square?
Reflector on cmh is 18"

18" above canopy

A square or 2 bars to put on either side
 

CobKits

Well-Known Member
all orders thru thursday are out. fri and saturday orders ship monday. thanks for your support and understanding in a difficult time
 

thccbdhealth

Well-Known Member
Ok, makes sense.
what would be your remediation on spectrum?

I have read that cmh is greatvwhen with hps.
So it has me wondering about leds at 2700k
 

vidrose

Active Member
Ok ive got my rig finally put together and will be setting up for flower soon. I have
8 -1818's 3500k cri 90 in a 4x5 area. They are wired in parallel for 50 volts. what would be the recommended current draw for all 8 of them. And what should i expect current draw from the wall to be.
 
Why does my clu048 not fit my bjb? Is it supposed to snap into place? I feel I could force the cob onto the posts oppostie to contacts but worried I might damage the cob
 
Top