6" x 22 " 558 samsung 561c led panel

[Ryante55]

View attachment 4016017 View attachment 4016019

Nice work those look a little more like the nextlight than the quantum boards if you can get them at the right price point I'm sure they will sell out!

 

[OLD MOTHER SATIVA]

thanks.. i am running the 250w panel at 100w..and just a circ fan in the room cools them well
i have sourced heat sinks to try them passive at 250w to check out temperature..i make 320 w dual panel 44" rigs with ac muffin fans..i like the air movement..
i am thinking of getting an 8" x 8" panel made ..
running such a large panel allows for good coverage and being able to go close to the plants

 

[OLD MOTHER SATIVA]

just turfed the skinny ag because the nanners were gonna be a problem and the early sample was good but not good enough
[didn't swallow my tongue]
i coulda used it for something but i justrammed it in the trash bin..
as my friend says:
"cull with extreme prejudice"

i will be testing the sample heat sinks on the 250 w pcb at 250 w to see if the heatsink work at full tilt..then three @200 w each
...my new 600w secret [jk] drivers are on the way
but i gotta say running 6 x 250w panels @ 100w each only needs a bit of air on it to stay really cool and really covers a 4 x 4
or 5 x 5 area well..also i can get really close..

even if the heatsinks work well i just dunno ..after growing with these things the 6 x 6" x 22" panels per frame seem dang good..

got some other inflower here is a newly flipped LCATHG sativa [last chance at the holy grail ]

very thick stalks massively dense branching right from the start

 

[GBAUTO]

please explain mr auto..unless its a joke in which case its a good one

hint ..the "dang led" comment was not what i really meant..

that skinny sativa will yield like nuts when it finishes..

To bad the images don't show-then the 'irony' will start to sink in....

 

[OLD MOTHER SATIVA]

the black african is finished..i love it
it stinks a lot..i have to keep unfinished j's in a glass jar

the manageable mex i finshed is my main go to
its everything i like

 

[OLD MOTHER SATIVA]

starting two of my led feed units design in a new tent

gonna use two [dual 250w] fan cooled units each dual run aat 320w

just a photo of how it begins..modified flood and drain inserts will be used

 

[OLD MOTHER SATIVA]

making a few more dual 300/320 w..either 150 or 160 w each with a fan on each panel
i find this about the most versitile.if i had a smaller area i would have them more side by side..
i need 4 feet though

 

[eyderbuddy]

making a few more dual 300/320 w..either 150 or 160 w each with a fan on each panel
i find this about the most versitile.if i View attachment 4038180 had a smaller area i would have them more side by side..
i need 4 feet though

now that's killer

hoping to see the yield of that beast

 

[OLD MOTHER SATIVA]

already done first flowering run with two over a 4 x 4ft area
600w i think did as good for me as 1kw hps..dense buds ..way downin canopy too
did not do numbers and stuff..

 

[VegasWinner]

always looking good. nice runs.

 

[Budies 101]

I like your 250watt pcb "bar" build the best, it's a lot like my lights in it's design (long light). Your lights get incredible spread of light I bet! I like the single bar* builds because if you need to adjust, and adjusting is common, then it's not the whole light that has to move... You can really be versatile with the 250watt builds imo rather than the 600watt builds.

=D

But I'm with you on these PCB builds are performing at surprising levels of amazing. I thought i'd simply have an easier build, but the spread of light clearly gets more light to the plan further down than HPS easily, and better than CoBs (less easily).

At 1k watts I feel the lm561c are around 2k watts of DE HPS. To me there is no more "leds are just not there yet," reality is LEDs are almost 2x better than HPS. If I had 2k led watts to do a side by side with 2k watts of HPS lights I'd grow 2x as much because I'd need a whole other 4x8 haha.

 

[lukio]

nice lights and plants dude

 

[OLD MOTHER SATIVA]

n

 

[OLD MOTHER SATIVA]

tested two 8 x22" sinks each with a 250 w 6 x 22" panel each power at 150 w

.even the led side is not hot

next stop is 250 w driver on one 250w panel

 

[Dave455]

tested two 8 x22" sinks each with a 250 w 6 x 22" panel each power at 150 w

.even the led side is not hot

next stop is 250 w driver on one 250w panel

Curious if your strip light build will provide more uniform coverage than the panels.

 

[OLD MOTHER SATIVA]

yes more uniform..of course ..just dunno about whether it flowers colas as good as concentrated more powerful beams

 

[Dave455]

yes more uniform..of course ..just dunno about whether it flowers colas as good as concentrated more powerful beams

Certainly in a SCROG, the strips would be ideal ....More single strips vs. double.

 

[OLD MOTHER SATIVA]

so far multi panels at low wattages are working extremely well

it would seem like strips should do the best job

..i can only rely on real world tests that i can monitor

i have not done a/b flowering strips vs panels in a serious test yet...

 

[OLD MOTHER SATIVA]

here are LCAHG [last chance at holy grail ]mex..in flower..closer this run..even canopy

update:i like these panel they work well..my plants have never been happier but

that said:

i have switched to another factory who will give me what i thinki need to improve on this
as well as help designing a smaller pcb

will be making the 560 led 6" x 22" spit into two separate channels of 280 for fresh current

from the driver

i still like the 6 x 22 best

the first new panel i get made will be the smaller one...
i have a new custom heatsink
and affordable efficient custom drivers sourced and tested
and gear right down to the ratchet hangers

stay tuned..

as you may see i am a grower first and have to believe in what i get made...these work well..i hope to up that

 

[PSUAGRO.]

Very healthy OMS........ grower first no doubt