standupRIU
New Member
what would be a good wattage for 260W QB kit at 18" from week 1 flower?
Im at 150W and going to raise to 200ishW over the next 3 weeks
Im at 150W and going to raise to 200ishW over the next 3 weeks
Full blast IMO. But no harm in cranking her up slowly.what would be a good wattage for 260W QB kit at 18" from week 1 flower?
Im at 150W and going to raise to 200ishW over the next 3 weeks
What size space? I had a small cab and couldn’t get above 180-200 at 12-18” without stresswhat would be a good wattage for 260W QB kit at 18" from week 1 flower?
Im at 150W and going to raise to 200ishW over the next 3 weeks
I would say 180 max then. You might get away with 200 but I doubt it. Might even need it to be more like 165-175nah they are now at the roof of the tent just to keep 18" now, the plants have probably got another 4-6" of growth in the next three weeks im expecting too
It will work but I would take 2 leads from the driver and not board to board.I saw LED Gardner on youtube say you can use the 320h-c2100 in parallel.
Thought bout wiring in parallel just to see if they'll come on.
But not sure about how the QB324's will like being wired in parallel. So I haven't tried it yet.
Have the boards wired in series.
And I thought the 2100 can be used in series just like the 1400.
That's just the difference in MOab with the 2100 being more mA?
And no the 320h-2100 is not rated as high as 200+V.
That's one of the things I'm concerned is keeping my lights from working.
HLG web site should provide wiring diagrams.I saw LED Gardner on youtube say you can use the 320h-c2100 in parallel.
Thought bout wiring in parallel just to see if they'll come on.
But not sure about how the QB324's will like being wired in parallel. So I haven't tried it yet.
Not for boards made by other companiesHLG web site should provide wiring diagrams.
correct not for bogus boards but for the boards they currently and have already sold. there should be diagramsNot for boards made by other companies
So looked at HLG site.If those boards are 100volt, no you can't run them in series on a C2100. I don't see specs for the 324 but the 304 run at 1050ma draws 108.3 volt, so figure roughly the same for the 324, so about 114 watt per board