LED Panel F-Series GEN 3 or Bridgelux EB Series Gen 2

ANC

Well-Known Member
I don't know why it hasn't occurred to me to check yet, but I just felt one of the larger colas.
When I say it is rock hard, I mean it is like a stick. I expected a bit of give, but no, Just rock hard sticky candy.
 

T-Time

Well-Known Member
I don't know why it hasn't occurred to me to check yet, but I just felt one of the larger colas.
When I say it is rock hard, I mean it is like a stick. I expected a bit of give, but no, Just rock hard sticky candy.
It is really like this. My N.Lights were exactly the same! Small but very packed buds. It's strain dependent tho. In the same run Chronic's buds went twice the size but were twice as fluffy at the same time.
 

ANC

Well-Known Member
This isn't a big yielder strain, but certainly the biggest individual colas I have seen it grow.
Consider I use the cheapest nutes you can get, about $8 for 5 pounds worth of dry chemical salts. I go over to an organic feed towards the end, but that is only cause I don't want to taste pharmacy weed.
 

Pistil Kid

Well-Known Member
If you don't mind me asking where are people getting these strips from I have looked on Digikey and arrow and neither supplier have any of these strips in stock ( looking for either 2 feet or 4 feet strips in 3000 or 3500k ) I am in Australia so Arrow was my go to for the free shipping. I love the builds and the bud shots keep them coming... cheers
 

Colo MMJ

Well-Known Member

Week 3 Day 5 after a light trimming
Don't have to... vermicompost..+ coco !
I will feed some Epsom salts from next week though to help with the later stages of flowering.
The plants seem to like the light at that height. If I lift the lights, the plants stretch with them to keep the distance. Lights are about 1.8m off the ground now. It also started showing some trichomes today.
This looks great? What are the newspapers for? So you have three rows of 44" Samsungs? Are they double rows? Will this cover 4x4? How many watts? Very nice.
 

ANC

Well-Known Member
To make sure they know politics... naaah, cheap reflectors. for some side light.
Yes, each fixture I have has 3 100W double rows. THey just phoned to say my aluminium came in, so I'll be adding a 4 strip unit next week to the others. That is a 2x4 tray, I have a plant on the side, and it is getting enough light to make a nice cola, not very big, but not to be thrown away easily. But I would use about 5 to 600W minimum for a 4x4
 

Colo MMJ

Well-Known Member

Cold$moke

Well-Known Member
I was looking at the f strips my self even though the bridgelux would spread more evenly

I figured there would be less wiring on the f strips lol
 

nfhiggs

Well-Known Member
If you don't mind me asking where are people getting these strips from I have looked on Digikey and arrow and neither supplier have any of these strips in stock ( looking for either 2 feet or 4 feet strips in 3000 or 3500k ) I am in Australia so Arrow was my go to for the free shipping. I love the builds and the bud shots keep them coming... cheers
Digikey has lots of them:
https://www.digikey.com/products/en/optoelectronics/led-lighting-cobs-engines-modules/111?k=&pkeyword=&s=59823&FV=ffe0006f,fffc05e6&quantity=0&ColumnSort=0&page=1&pageSize=25
 

KonopCh

Well-Known Member
What's better choice for 4x4 tent, Samsung or Bridgelux? Can someone give me numbers for 1050mA and 1280mA (max current for my driver)?

I plan to use 1120mm strips, I already have one HLG-240H-C1050A driver (238V max.), so 5 Samsung strips fits perfectly, or 6 Bridgelux maybe? Vf of Bridgelux at 700mA is 39V, how much is at 1050mA or 1280mA?

Looking for 440-500W maximum. As I already have MW driver from curent light, I only need to buy another one and strips and ALU channels.
 

PSUAGRO.

Well-Known Member
I choose not to, on account of it being conductive, and the LED's not having a clear mask, so there are exposed contacts.
good points!, I guess flat white paint on cardboard then?......................
 
Last edited:
Top