maxamus1
Well-Known Member
Ok so here we r. I got my soil test results in n im not sure how i want to proceed not sure if i should cut in half again or just add n and call it a day.
Attachments
-
1 MB Views: 24
Kelp and Epsom salt, but wait for a second opinion, I'm not good at judging test results.Ok so after talking with the guys over at unibest not sure where to go but they did say just adding N will be ok and should not hurt the girls. Now if i can get some help from u guys on how to get these Micronutrients that would be awesome.
We discussed the ironite, Recomended via Wet, and it appeared to work wonders for my garden.Ok so after talking with the guys over at unibest not sure where to go but they did say just adding N will be ok and should not hurt the girls. Now if i can get some help from u guys on how to get these Micronutrients that would be awesome.
Yeah but my iron is decent. I did get an email from them after my call they had some suggestions on the kis site for me that would help all the way around. He also sent some other links to further help me out. Also just to update i added blood meal to my mix for the N so it could start breaking down for my next grow. And will be checking the web site for their recommendations which was the same as yours the biomin so might have to find the $$ to get it.We discussed the ironite, Recomended via Wet, and it appeared to work wonders for my garden.
I also bought a bottle of biomin 153 off the kis site. It appears to be a nice option for boosting micros without negatively effecting your soil biology. I applied a light dose of 1/2 tbsp in a couple gallons of water to days ago. Plants are still happy as can be. This stuff is designed for the ag community and didn’t have any container application rates so I just went with a super lite dosage out of caution. Might want to check it out. Has a small amount of N in it too, 1-0-0
Mn sulfate, Zn sulfate, and Borax... It was hard to read the #'s but your Ph looked high enough that it might not be affected by the sulfates. If you have an excess of Ca, then the sulfates shouldn't matter anyways. I think that it will just turn into gypsum.Yeah but my iron is decent. I did get an email from them after my call they had some suggestions on the kis site for me that would help all the way around. He also sent some other links to further help me out. Also just to update i added blood meal to my mix for the N so it could start breaking down for my next grow. And will be checking the web site for their recommendations which was the same as yours the biomin so might have to find the $$ to get it.
Sory i havent posted back here but yeah after i talked to them i figured i would leave my soil as is with out cutting it. I still need to add my micros as i have added bloodmeal for my low N.Mn sulfate, Zn sulfate, and Borax... It was hard to read the #'s but your Ph looked high enough that it might not be affected by the sulfates. If you have an excess of Ca, then the sulfates shouldn't matter anyways. I think that it will just turn into gypsum.
Remember, if you cut your soil again. You are also dropping the micros. I'm in the same boat that you are with the micros/trace elements. Let me drop another big hint, keep a very close eye on your P inputs and do not use P for re-amending soil! P is responsible for locking up Fe & micros. I stay far away from bone meals, fish meal, and rock phosphates. Look at my soil test, I only used fish meal in that batch. I am going to switch to crab/crustacean meal for my only P source, it has chitin.
Work on using less nutrients and more rock dusts. Per cu.ft of soil, I use 1c nutients and 2c rock dusts. I think that my soil needs more time to break down the rock dusts, so I am using Mn, Zn, and Cu sulfate. I am about to send in another soil test, so this test is before I treated it with the sulfates.
View attachment 4179123
I took a picture of my computer screen and made sure to leave my name out of frame. It's really hard to read your #'s.
Mn sulfate, Zn sulfate, and Borax... It was hard to read the #'s but your Ph looked high enough that it might not be affected by the sulfates. If you have an excess of Ca, then the sulfates shouldn't matter anyways. I think that it will just turn into gypsum.
Remember, if you cut your soil again. You are also dropping the micros. I'm in the same boat that you are with the micros/trace elements. Let me drop another big hint, keep a very close eye on your P inputs and do not use P for re-amending soil! P is responsible for locking up Fe & micros. I stay far away from bone meals, fish meal, and rock phosphates. Look at my soil test, I only used fish meal in that batch. I am going to switch to crab/crustacean meal for my only P source, it has chitin.
Work on using less nutrients and more rock dusts. Per cu.ft of soil, I use 1c nutients and 2c rock dusts. I think that my soil needs more time to break down the rock dusts, so I am using Mn, Zn, and Cu sulfate. I am about to send in another soil test, so this test is before I treated it with the sulfates.
View attachment 4179123
I took a picture of my computer screen and made sure to leave my name out of frame. It's really hard to read your #'s.
I've dealt with Build-a-soil and I really wasn't impressed! I spent $1K on 400gal of soil thinking that I was going to be able to use it straight out of the package. It wasn't any better than my compost that had extreme excess of phosphorus. They are just rip-off artists that repackage supplies... I was horribly disappointed in the soil that I bought from them!i checked out the micro blend they recommended but dont have the $50 to drop on it right now.
I think that it could have an indirect affect like Ph dropping below 6, that is when stuff starts dying. That is also another problem that I had for a while, my Ph was always around 5.8! Otherwise, the Zn and Mn sulfate are mined straight from the ground, I don't think that they are chemicals that are man-made. I could be wrong though? You could go to the grocery store and buy a box of borax for the boron, that is natural stuff too.Stang, you concerned at all about having those sulfates negatively effect your soil biology
Peace-Regarding being uncooked...
I have a backwoods observation--
I've noticed soil mixes like this is an INTENSE amount of calcium carbonate as a mineral
I don't cook my soil, I mix and plant. I CANNOT use calcium carbonate on this level without locking out iron.
But I have no....real experience with super soil or ROLS per se... Only experience with hot-mix recycled soils
I haven't tried this "soil cooking" (at least not intentionally, so I can't much compare hot-mix to it, but hot-mix works.Peace-
See I’m wondering for my own here- I am at the beginning of building my own soil. I’m under the impression that after my compost(s) finish cooking, and I make my base mix (compost WC coco perlite), i then have to add all my amendments and let that bitch cook together, let the ph balance out. I have been under the impression that if I mix in those amendments into my base that my plants will get beat the hell up by all the amendments that haven’t, well... cooked?
Idk man what am I missing here. I want to skip as much “waiting” as possible. What dummy-newb shit am I missing.
In a word, what you're missing is "Patience".Idk man what am I missing here. I want to skip as much “waiting” as possible. What dummy-newb shit am I missing.
Well, I really don’t care much between using coir or peat. Both are cheap and easy for me to obtain here. And I had that feeling about coir actually. It’s such a hardy natural material that takes forever and ever to break down, makes me wonder how well it gets along with other decomposed organic materials in a living soil. But it’s all the hype, so whatever. Peats cool with me.In a word, what you're missing is "Patience".
Organics in general and microbes in particular work at their own rate and time. You can nudge them a little, but generally you have to adjust to their schedule since they really aren't going to adjust to yours and their's is really on the slow side.
LOL After 30+ years of using chemical nutes and seeing effects in a day or so, the lag time in organics took a lot of getting used to. Now, I consider 2 weeks to be really 'fast'.
Something you ought to look into though is the leaching of sodium(?) and K from coir in a LOS environment. Does fine with liquid nutes, but problems seem to happen when microbes get involved. No personal experience, just something I've noticed mentioned over time.
Wet
Man I’d be too nervous about adding all those composted manures together and the amendments and throwing it right in. I’d worry about high nitrogen and just overall imbalances idk, I’m new tho.I haven't tried this "soil cooking" (at least not intentionally, so I can't much compare hot-mix to it, but hot-mix works.
My method is thusly-- I use last year's soil and per 200g of dirt, I add a full 2cf bag of steer manure, half a 1cf bag of poultry manure and mix thoroughly. Then I top dress with a two cups or so of seabird guano (pelletized), anywhere from two to four cups of Dr. Earth 5-5-5 general fertilizer, and two cups of oyster shell or dolomitic lime.
Water in to set, plant in it at your leisure.
I find my mix runs out of steam about transition time, though.
I’ve got this recipe written down! I listen to Roy! LolView attachment 4179847
heres a no cook recipe from my friend rasta roy..
and no need to worry about salts on Coir thats been rinsed for 2 years..
@TheBeardedBudzman Don't stress brotha.. u got this..