enough tops or too little for your tastes

[Kipn]

is it too little or too many tops for a 3x2ft
should i aim for more or space it out more next time

 

[hotrodharley]

is it too little or too many tops for a 3x2ft
should i aim for more or space it out more next time

I reckon harvested dry weight will tell you everything you want to know. If you have the light and can keep RH and heat controlled you should be happy.

 

[Kipn]

I reckon harvested dry weight will tell you everything you want to know. If you have the light and can keep RH and heat controlled you should be happy.

i know what you mean im only expecting 3oz but i was meaning the spacing still trying to improve my scrog and this is how it ended up this run

 

[hotrodharley]

i know what you mean im only expecting 3oz but i was meaning the spacing still trying to improve my scrog and this is how it ended up this run

What kind of light? The spacing is fine depending on amount of light you can pour on it.

 

[Kipn]

What kind of light? The spacing is fine depending on amount of light you can pour on it.

lights still shit was about to buy a QB but was short of the funds. this was just a experiment that didn't work out how i intended so then i decided to use then to practice my scrogging end weight im not worried about

 

[hotrodharley]

lights still shit was about to buy a QB but was short of the funds. this was just a experiment that didn't work out how i intended so then i decided to use then to practice my scrogging end weight im not worried about

Put a 1000 watt HPS over them. They'll stretch plenty for you to practice with.

 

[Kipn]

Put a 1000 watt HPS over them. They'll stretch plenty for you to practice with.

ill be getting two 135w QB soon i dont like saying it but im still using a vipar 600 so 275w. i dont like the idea of 1000w id way rather go the two QB but that's going to be next yr

 

[GBAUTO]

is it too little or too many tops for a 3x2ft
should i aim for more or space it out more next time

well, I do see a few sq. inches that aren't full...

 

[GBAUTO]

ill be getting two 135w QB soon i dont like saying it but im still using a vipar 600 so 275w. i dont like the idea of 1000w id way rather go the two QB but that's going to be next yr

Your vipar should give you almost enough intensity to get some decent results. The biggest challenge is going to be uniformity across the space.

 

[Kipn]

Your vipar should give you almost enough intensity to get some decent results. The biggest challenge is going to be uniformity across the space.

uniformity as in the lighting? id agree i am not a fan of using one single light. i have noticed by doing so the lights have one hot spot where the light is focused.
i do have a few squares that just have fan leaves shoved in to. not 100% sure how to deal with leaves yes. i just try tuck them out the way as i rather not chop them off but then it makes it hard to stick a head in that spot with out over crowding

 

[GBAUTO]

uniformity as in the lighting? id agree i am not a fan of using one single light. i have noticed by doing so the lights have one hot spot where the light is focused.

Yes, lighting uniformity or perhaps even distribution is a better description. When you have the vipar low enough to get enough intensity, the edges drop off to practically nothing. This is where multiple light sources help

 

[Kipn]

Yes, lighting uniformity or perhaps even distribution is a better description. When you have the vipar low enough to get enough intensity, the edges drop off to practically nothing. This is where multiple light sources help

i am intending to swap out to better leds. 2 so i can keep a more even spread
ive used the vipar for about 4 runs so i know how the light preforms and how bad it really is. its good for vegging a plant flowering not so much

 

[Kipn]

so ive been a retard apparently and have left a vent open in my tent for the past month when i removed a fan so have been letting light get in big time .
today i noticed a few balls showed up on my plant lol RIP sorry plant hope you make good hash