Heisenbeans

Status
Not open for further replies.
Stiickygreen

Stiickygreen

Well-Known Member
Gotta be someting like that Mr. Head....or it's Admin itself and there's no one to throttle them back in the same fashion and tell THEM to STFU. Either way...it really doesn't bode well, IMO, on a pot site...especially when someone then turns around and knacks others for the exact same basic behaviors and outbursts. But hey..it is what it is for as long as it lasts...like everything else on this rock.

At this point it's just truly free advertising....so in the end...the censorship doesn't really do much overall but leave a bad taste in the mouth.
 
Herb & Suds

Herb & Suds

Well-Known Member
Stiickygreen said:
It's definitely hard to contain some of it...i know that feeling too guys. These boards are all so whore'ish/hard up for traffic and sales for their advertisers that they are readable without subscription so lotsa folks on the outside are priivy to what is said here and by whom. LEO likely has a heydey....but hey...let's worry more about folks getting pissed and losing it when chided and ragged on endlessly by folks who should have been throttled back long before any "bans" came to be. And again...one side says STOP THIS SHIT....even when it's weed/seed/greed related... while the politics and associated threats/jabs rages on in a huge political battle...... on a friggin pot site no less without the SAME recourse. (closing those threads/banning those folks forever). Talk about take it the fuck elsewhere... but NO....same shit on here everyday that has nothing to do with weed and everything to do with hatin'. If it was across the board censorship kinda stuff based on a set of rules that were >followed<...well...can't say I agree with any of it....but at least things wouldn't be lacking in so many attributes if the censorship was levied evenly. When it isn't levied evenly across the board it shows a huge lack of respect, IMO....respect the powers-that-think-they-be then want to be shown in your posts. Are any of those political threads respectful/follow the TOU? Whatever. Seems more "I don't like your ways" than "this is the line in the sand".....but whatever...i'm just a grower. (who has been on at least a dozen sites like this over the last 20 years. Dime a dozen stuff....for sure....and the same folks...LOL)

Re Heisen...i think he said recently he had enough shit on the table and was gonna go in an pheno hunt within the strains he already has.

Passin' to the left......
Click to expand...
You sound very familiar
 
Jesselikes2grow

Jesselikes2grow

Well-Known Member
rollinfunk said:
Great guess. 1980. I guess I'll start watching his videos to stay in the loop. I think I gotta get some banana cookies or some crosses of it
Click to expand...
I got you man. Got BBC s1's coming from "He that cant be named" lol. Happy to give you a cut once they've grown and can handle a chop. Get that ECSD and we'll swap some stuff. Really go to town then. Plus whichever crosses heisen wants to throw in there. I didnt pick them, just asked for nothing piney in the selection. So who know what the rest of my fire will be....only heisen. Lmfao...
 
Heathen Raider

Heathen Raider

Well-Known Member
genuity said:
All I know is the way heisen was trying to bad mouth me,with post on his IG,with all false information was hoe shit..(I do not do that IG beef shit)
I had nothing to do with him or anyone getting banned.not even partly.

& I don't post & delete Notting, everything I post is what I mean
Click to expand...
Would be great if all involved could make peace , it puts customers in a uneasy position and I like all You guys and don't want to have to choose sides or feel like I am shitting on someone if I buy Chuckers gear or Heisens gear or anyone else's . Like I said I am not assigning blame for the current state of things as I don't know who did what, above my pay grade shit .
 
Heathen Raider

Heathen Raider

Well-Known Member
NoWaistedSpace said:
I DIY'd mine from a 10 gal Family Dollar tote. (5 bucks). 40 sites and easy to regulate water temps. Pump was the most expensive part.
Click to expand...
I just want to make sure I get 3-4 good clones off a really nice GPS Cookies n Chem and a Cube Cake , I would get that clown from the fair who blows up animal balloons to assure it happens if I had too because I suck balls at cloning in prior attempts lol
 
Bodyne

Bodyne

Well-Known Member
Heathen Raider said:
So just go buy a stronger air pump and a 10 inch or so long strip air stone? Ditch the supplied pump?
Click to expand...
'Use their's just add to it, or I guess if you don't want to you can replace, but I'd just add a tad more to it, more water and air swishin, the better Ima thinkin. I use clonex too, just adjust the doses, but many don't like it, but I swear by it, even soakin cubes in ph'd clonex before squeeze and seeds. Had no idea them heat mats got so hot, I been cookin some beans, and finally figured it out. Got a timer, so should have that prob solved.
 
Jesselikes2grow

Jesselikes2grow

Well-Known Member
Bodyne said:
lil advice, spend extra ten buck and either get a dual or reg sep air pump and air difuser or good air stone.
Click to expand...
So for a 4 to 6 clone machine type setup is there one you'd recommend? Or a build design you've done/used/plan to use etc? Preferably low cost as possible, I can diy with the best of them if that sways your recomendations. Not looking to spend more than about $50 tops. I've looked online and such but haven't decided on what I'll go with. Have been seeing what works best for most people as simply as possible before I make a final decision.
 
NoWaistedSpace

NoWaistedSpace

Well-Known Member
Heathen Raider said:
I just want to make sure I get 3-4 good clones off a really nice GPS Cookies n Chem and a Cube Cake , I would get that clown from the fair who blows up animal balloons to assure it happens if I had too because I suck balls at cloning in prior attempts lol
Click to expand...
I use "Clone Tek" in the water I soak my cuts in and dip in "Clonex" and drop in desired "medium". Haven't used a cloning machine for a few years now.
 
Heathen Raider

Heathen Raider

Well-Known Member
Bodyne said:
'Use their's just add to it, or I guess if you don't want to you can replace, but I'd just add a tad more to it, more water and air swishin, the better Ima thinkin. I use clonex too, just adjust the doses, but many don't like it, but I swear by it, even soakin cubes in ph'd clonex before squeeze and seeds. Had no idea them heat mats got so hot, I been cookin some beans, and finally figured it out. Got a timer, so should have that prob solved.
Click to expand...
My hydro shop had no Clonex but I do have liquid black crystal to add to the Resoviour and root hormone gel
 
Heathen Raider

Heathen Raider

Well-Known Member
Jesselikes2grow said:
So for a 4 to 6 clone machine type setup is there one you'd recommend? Or a build design you've done/used/plan to use etc? Preferably low cost as possible, I can diy with the best of them if that sways your recomendations. Not looking to spend more than about $50 tops. I've looked online and such but haven't decided on what I'll go with. Have been seeing what works best for most people as simply as possible before I make a final decision.
Click to expand...
You can buy a Rubbermaid with sealing lid and cut holes in the lid that the pucks fit in drill hole in side for air line and buy pump and stone for a small clone set up , I was lazy and bought mine
 
Jesselikes2grow

Jesselikes2grow

Well-Known Member
Heathen Raider said:
I just want to make sure I get 3-4 good clones off a really nice GPS Cookies n Chem and a Cube Cake , I would get that clown from the fair who blows up animal balloons to assure it happens if I had too because I suck balls at cloning in prior attempts lol
Click to expand...
I am a complete beginner at cloning. I have done from seed my previous 3 yrs for every crop. I did 1 half ass attempt from a pruning the plant needed. It died. Lol. 2nd attempt I did the peat puck sitting on soil in a solo cup with a dome and perfect climate controlled grow box. Success. Got a little weak n ugly looking but came back to perfect health in about a weeks time. Took 5 more clones same method. 2 weeks they're all alive and I see roots out of pucks. They did the same thing though where I thought a couple would die. I want to become better at this, and if a little machine makes it mo betta, mo fasta, then let the machine take over. Tell me how it goes for you if you would pls
 
Status
Not open for further replies.
Top