After mixing those.
Use 2.5ml A + 2.5ml B for every liter.
Can we use this the whole grow?
If yes,
What are the volume for seedling,veg n flower.
Currently im using lucas formula.. so convenient..
Thx again
Yes from seedlings to harvest in hydroponics. The max dose is 10mL a gallon (I’m in the USA).
I believe you have a ppm/ec meter, just star low you know every strain is different some like high ppm some like low ppm. My last run my kushberry didn’t like over 350 ppm @700 conversion.
For seedlings I use stinkbud kiss method
I use Half gallon RO water
140mL A (don’t mix a and b as concentrates)
140mL B
50mL cal mag
(Unfortunately with this mix you get solid salt build up at the bottom of the bottle, that’s why I don’t share this mix but it works for me)
Mix with the half gallon water in a jug then add to the reservoir, starting at 100-150 ppm @700 then a couple of weeks later little by little work your way up. Watch for leaf tip burn when increasing ppm. Later on you will know when to add cal mag separately at 150ppm.
here more of how to use hydrobuddy, you need a 64x windows computer.
Pour salts in bottles: Part A: Calcium Nitrate Potassium Nitrate Iron DTPA (10 or 11%) Part B: Monopotassium Phosphate Magnesium Sulfate Manganese Sulfate Sodium Borate Zinc Sulfate Sodium Molybdate Fill the rest of the bottles with RO/distilled water. Potassium Hydroxide flakes if you need...
www.rollitup.org
Good luck