TheySeeMeRollin
Member
Bumping for attention. Anybody have info on how this would work compared to the current setup?
Thermoelectric wine cooler drying and curing - DIY
- Thread starter Hook Daddy
- Start date
by2
Active Member
60W seems like a lot of heat. I am not sure the refrigerator would be able to keep cool.
TheySeeMeRollin
Member
by2
Active Member
45W will probably work. It does look interesting but what would the benefit be from the current meta?
The controls are on the dehumidifier so I guess you would need to open the fridge every time you want to change the settings.
HeavzGunner93
New Member
Guys what is the best way to test if your buds are ready for jarring? Do you put a few out at room temp and then in a jar with a rh meter or?
HeavzGunner93
New Member
ahhh and another question I have 1 plant that I will put in the unit this weekend but my other two need another 10 days I would say. How would you proceed in this case? has anyone added more plants at a later stage and how do you deal with the rh setting then?
dwc420letsgo
Well-Known Member
I just put my buds next to my ear and listen to the sound it makes when squishing it. If it snap, crackles and pops, it's ready. Otherwise, stick in in a jar when it feels dry and put a hygrometer on it, and if the moisture rises from 61, it's probably a little too wet still.
dwc420letsgo
Well-Known Member
I would plan for a 10 day dry on the first one, get it in a jar, then cut the other plant and stick it in the ghettotrol. If you put the wet buds in with the dryer buds, the latter will likely absorb some of that moisture so you would be working against yourself there.
HeavzGunner93
New Member
Have you found what are the best settings for a little bit faster dry for the first plant. I do not mind for the first one to not be perfect the other two are more important
dwc420letsgo
Well-Known Member
i think the more you raise the temp, the faster the dry cycle... i believe cannatrol has a 4 day dry cycle with the temp in the 70sHave you found what are the best settings for a little bit faster dry for the first plant. I do not mind for the first one to not be perfect the other two are more important
I love it. A true diy canatrol.
Scibomber420
Member
worked great
Attachments
@Hook Daddy
When the buds are ready and you put them in Grove Bags, do you leave the dehumidifier on or off?
When the buds are ready and you put them in Grove Bags, do you leave the dehumidifier on or off?
Hook Daddy
Well-Known Member
Once you move the bud into bags or jars there’s no reason to keep the dehumidifier on. I use an older compressor based cooler for seed and bag storage without issues.
HeavzGunner93
New Member
Hello again guys,
I just harversted one of my plants this weekend. I have set up the Inkbird as instructed at 78% with 1% difference and lowering every day by 1%. My coller is pretty big with two paltiers inside for 35 bottles. What I am noticing is that I am not collecting as much water as you guys have mantioned. It has been 36h since the start and till now the dehumidifier has collected I would say 50ml inside the tank (I did not take my dehum apart) and there are a few drops in the channel of the cooler itself. I guess maybe that is due to the fact that material from the plant is not that much it filler only two shelves of the cooler and it has 8 in total. What do you guys think should I lower in bigger intervals?
I just harversted one of my plants this weekend. I have set up the Inkbird as instructed at 78% with 1% difference and lowering every day by 1%. My coller is pretty big with two paltiers inside for 35 bottles. What I am noticing is that I am not collecting as much water as you guys have mantioned. It has been 36h since the start and till now the dehumidifier has collected I would say 50ml inside the tank (I did not take my dehum apart) and there are a few drops in the channel of the cooler itself. I guess maybe that is due to the fact that material from the plant is not that much it filler only two shelves of the cooler and it has 8 in total. What do you guys think should I lower in bigger intervals?
Hook Daddy
Well-Known Member
You can dry quicker if you want, since it’s not loaded you’re not going to collect as much water, that’s not something to worry about. You can skip a few percent points, or just keep on and everything will be fine, a slow dry is not a bad thing, it’s why I built mine in the first place.
HeavzGunner93
New Member
Thank you for always helping us @Hook Daddy you are a blessing haha. I will attach a picture of the harvest tell me what do you think.
Hook Daddy
Well-Known Member
That looks great, congrats on a nice harvest! I’d just let it dry nice and slow on its original schedule, it will turn out great!
HeavzGunner93
New Member
Thank you once more. I will follow your guide and update on the result.
mobilekasey
Member
The way I do it is watch the history of my RH. If I have my fridge set at 60 and the average is 60 for a couple of days I know its ready to go.