Harvest a Pound Every Three Weeks!

dagobaker

Well-Known Member
Just a note, that this system works well without the sprayers as well. I guess sort of a nft set up, just plumb water into one end of tubes and drain out the other everything else the same. I'm on my 2nd grow like this and results are wonderfull. had problems running the ppm so high with the botani nutes. I have settled into a 1400ppm area that seems to work fine(for Sensi Superskunk), they showed some burn at 1800 but like the author said That's strain specific. Great post and great info, if you haven't tried this set up yet try it, especially the cloner, works great!!!!!!
probably not a bad idea bout no misters
maybe ill do one run with no misters and see what happens
they clog and are a pain to clean
this wont work for cloner or veg but flowering might
 

MeJuana

Well-Known Member
What keeps the jets of water from tearing your roots apart? Just holes at the ends of the PVC only but not near your roots?

Yeah how can you try this with your cloner? Make it on rails too?
 

Metalarc Lemon

Active Member
I'm sorry I wasn't that clear, the cloner is made per stinkbuds directions with the sprayers and is a spectacular unit. Also I use no veg unit, they veg in cloner until ready to flower. Once the roots are about 6 inches long I add veg nutes to cloner at about 700ppm and they stay there for a total of 3 wks from mother to flower and have roots piled on the floor of the cloner. The flower unit only has no sprayers. The flower unit is plumbed to the far end with 1/2" pvc and plumbed into the top of the 4x4 tube. there are no tubes inside the 4x4's water is just fed in one end and out the other. I use 1 1/2" pvc tube for drains as well and dont use the squares cut in the ends of 4x4 or in the res lid. I haven't tried it yet but Im sure this would work with the pump on 24 7 as well like a dwc set up since the top inch of roots are not submerged in water.
 

Metalarc Lemon

Active Member
Also nice bud Dagobaker, man 80 days though I don't know if I have that patience anymore since using this superskunk, I could almost squeeze 2 harvests out of that same time and its killer smoke. It finishes at around 42 days and is super frosty and yummy! but again thats some tasty lookin goods you got there too.
 

bromper

Member
you guys know if you have to run a cycle time my local hydro shop told me that you can run them on 24 hours those cycle timers are so damn expensive? is it worth it?

Also idk if you guys have seen the high times global grow guide 2009 stink bud put his post in there but it seems like its messed up? Cuz he shows the vegetative unit being the same as the flowering unit but yet the instructions for building the veg unit are for his dual container set up?

Do you think it would just be easier to build a veg unit thats the same thing as the flowering unit which is what im thinking about now is there any negatives to this?
 

slipperyP

Well-Known Member
you guys know if you have to run a cycle time my local hydro shop told me that you can run them on 24 hours those cycle timers are so damn expensive? is it worth it?

Also idk if you guys have seen the high times global grow guide 2009 stink bud put his post in there but it seems like its messed up? Cuz he shows the vegetative unit being the same as the flowering unit but yet the instructions for building the veg unit are for his dual container set up?

Do you think it would just be easier to build a veg unit thats the same thing as the flowering unit which is what im thinking about now is there any negatives to this?

The pumps put of alot of heat....by running them less you cut down on heat....plus i thin the 80/20 ratio to air promotes more growth imo
 

NukeEm

Member
I have a medical marijuana card and I am also a provider for several cancer patients. I lost my father and aunt to cancer. My mother has also lost a breast to cancer. I'm on a mission!

If a patient needs medicine and it takes 12 weeks before their first harvest, what do they do in the mean time? That's where I come in...

I can have 6 mature plant and 18 plants under 12" per patient. I can also have 1.5lbs. of dried material per patient.

This is the main reason I always keep my veg plants under 12" high.

It's my destiny to help others and I do what whatever it takes...
i wish we had you around, my uncle had died of cancer and more of my family members are showing signs of possible cancer(s) i too am trying to help people with this plant. good luck to you
 

StinkBud

Well-Known Member
Get'em while they're hot!
http://www.stinkbuddies.com/products_dvd.htm

How To Build the StinkBud Jr. and Cloner systems DVD



High Times author, StinkBud is revolutionizing the Medical Marijuana Industry. Never has there been an easier, more cost efficient method of growing hydroponics. StinkBud's methods will make your life so so easy you'll wonder how you ever got by without him. The success rate of the StinkBud system is unbelievable! Virtually everyone who has tried it has had wonderful success. Before long, you too will be a certified “StinkBuddy”. Once you switch to the StinkBud method of growing, everything else will seem like slow motion.


The DVD covers everything you need to know about building and maintaining the StinkBud system of aeroponic growing.
The DVD includes:


  • Starting from seed
  • How to take clones
  • Step-by-step process showing you how to build the StinkBud cloner system
  • Step-by-step process showing you how to build the SinkBud Jr. Aeroponic system
  • Everything you need to know about nutrients
  • Harvest & Curing
  • Maintenance
Special bonus CD-ROM! Contains all the plans and instructions to build all the StinkBud systems including the StinkBud Sr. system and veg unit. Everything is in PDF format so you can print out all the plans, parts lists, tool lists and instructions yourself.


The StinkBud Cloner costs about $40 to build yourself. The StinkBud Jr. systems costs less than $100 to build. Never has there been a simpler more economic solution for the do it your self grower.


Don't miss chance to become a StinkBuddy. This DVD has everything you need to get started. All you need to add is time and love.


StinkBud
 

GringoLoco

Well-Known Member
StinkBud Cherry and StinkBud Kiwi? You know you are only taking someone else's strain and giving it your own name, most folks would consider that stealing, no? (Kiwi = Green Crack)

Oh wait, guess you are good with that.

You didn't even grow that Banana or GC yourself, you just took pictures of it!

Nothing good comes from dishonesty.
 

potpimp

Sector 5 Moderator
Hey Stink, just wanted to let you know I did another grow with the Stinkbud "Binford Tools SB9000" system. It was a seed run of mini-MTF. I now have over 400 viable and over 100 more that "might" pop. As soon as I get moved to Cali and get my medi card, I'm going to make a ginormous Stinkbud "Binford Tools SB50K" that will hold the maximum allowable number of plants. BTW, I was thinking of naming my child after you but on second thought... would a puppy be ok?
 

txhomegrown

Well-Known Member
I run my veg and flower pumps 24/7 and havent had any problems. I do use that $50 1 on 4 off pump for the cloning unit. That is the only place I have any problems with res temps. I have been doing it like this for almost a year.
 

DIRTHAWKER

Well-Known Member
StinkBud Cherry and StinkBud Kiwi? You know you are only taking someone else's strain and giving it your own name, most folks would consider that stealing, no? (Kiwi = Green Crack)

Oh wait, guess you are good with that.

You didn't even grow that Banana or GC yourself, you just took pictures of it!

Nothing good comes from dishonesty.

Holy crap!! Gringo what happend? why are you hatin on stink? he has been nothing but a generous mentor to so many people, i dont understand?


AS i speak, my hands are raw from trimming the dankest blackberry buds you have ever seen, my back aches yet i am estatic at such a bountiful harvest.
Crystals, heavy and white that cover the buds and will not wash off MY HANDS with even gasoline. Thanks STINK!!!!
 
Top