Nirvana White Rhino Round #2 400w MH/HPS grow box sog

feildgrow247

New Member
Well heres the deal, got this grow box for lighting i have a 400w MH for veg and then soon as i switch to flowering i will put a 400w HPS bulb in. Also i have 2 - 6in inductor fans (blowing out) with about 15 small intake holes for ventilation. for circulation i have 3 mini personal computer fans blowing down at all times. with this set up i recently switch over to DWC bubbleponics as you can see in the pics i just purchased the techflora nutrient kit which should be good enough for a one plant deal. the other 3 seeds that you see in the rock wool are for a buddy of mine that were mystery seeds. so i guess we'll see what happens folks.
 

Attachments

  • IMG_0866.jpg
    IMG_0866.jpg
    64.6 KB · Views: 60
  • IMG_0867.jpg
    IMG_0867.jpg
    68.5 KB · Views: 79
  • IMG_0868.jpg
    IMG_0868.jpg
    51.9 KB · Views: 74
  • IMG_0869.jpg
    IMG_0869.jpg
    52 KB · Views: 69
  • IMG_0872.jpg
    IMG_0872.jpg
    78.4 KB · Views: 75
Use a 1/4" spade pre-drill bit and tear into the side of that bucket for the hose line =P great pics; EC/PPM updates? Age of plant?
 
Age of plant = half a week in rock wool and 1 week exactly today in the DWC, as far as ppm goes i dont give a fuck untill i see something wrong and so far i have some pretty good veg going.
 

Attachments

  • IMG_0890.jpg
    IMG_0890.jpg
    67.1 KB · Views: 30
  • IMG_0891.jpg
    IMG_0891.jpg
    79.3 KB · Views: 32
  • IMG_0892.jpg
    IMG_0892.jpg
    80.6 KB · Views: 33
  • IMG_0893.jpg
    IMG_0893.jpg
    61.9 KB · Views: 43
Nirvana seeds are amazing ive never had a problem with any of them cracking. usually can put them in rockwool with in 2 days of germinating in paper towel. i also just noticed a mutant 10 leaf plant
 
these 2 pics were taken April 18th as you can tell that the veg is doing amazing
 

Attachments

  • IMG_0906.jpg
    IMG_0906.jpg
    87.6 KB · Views: 77
  • IMG_0907.jpg
    IMG_0907.jpg
    60.7 KB · Views: 44
since these last 2 pics were taken i trimmed a couple of the fan leaves that were getting to bunched up and topped 4 of the main tops as well.
 
As of today i officially switched it over to flowering. Also i installed a 400w HPS bulb and put up some mylar. she sure is looking beautiful! and im highlt medicated hahaha
 

Attachments

  • IMG_0918.jpg
    IMG_0918.jpg
    94.8 KB · Views: 48
  • IMG_0919.jpg
    IMG_0919.jpg
    95.7 KB · Views: 51
  • IMG_0920.jpg
    IMG_0920.jpg
    99.1 KB · Views: 68
Couple questions.

Do you have any exhaust fans setup? Also, what type of heat does your 400watt HPS produce, do you have any venting to it at all? Lastly, did the Nutirent package come with feeding instructions/scheduled.

Looking great.
 
yes in matter i do have 2 - 6in inductor fans blowing out with about 20 intake holes bringing fresh air in, as far as temp my water has always stayed cool and my buddy threw a thermometer in there and it was around 80-85F and this was measured at the end of a 16 hour light cycle so it was at its hottest point in time. i do have 2 mini fans blowing right on the plant adding a nice breeze. and yes the kit came with a complete schedule for clones to seeds to veg to flower. here are some fresh pics that i just took, im using some small hooks for something that i can tie the lsting string to as you can see
 

Attachments

  • IMG_0923.jpg
    IMG_0923.jpg
    102.3 KB · Views: 30
  • IMG_0924.jpg
    IMG_0924.jpg
    88.5 KB · Views: 29
  • IMG_0925.jpg
    IMG_0925.jpg
    101.7 KB · Views: 28
  • IMG_0926.jpg
    IMG_0926.jpg
    111.7 KB · Views: 36
  • IMG_0927.jpg
    IMG_0927.jpg
    45.2 KB · Views: 32
  • IMG_0928.jpg
    IMG_0928.jpg
    53.3 KB · Views: 30
  • IMG_0929.jpg
    IMG_0929.jpg
    42.1 KB · Views: 30
  • IMG_0930.jpg
    IMG_0930.jpg
    92 KB · Views: 32
Back
Top