Grow Tent Club

drolove said:
looks good but i would get that big bend out of your ducting on the right side to increase airflow.
Click to expand...

Thanks, that was before she was running, had the hps bulb in to make sure it fired up in case of possible return. Right now I do not have any ducting on the right side, until I flip that is. Since the height will be at it's lowest when flipping, I can cut the ducting to size and connect to the filter. That seems that it will still bend... but shorter distance.... I have seen the set up online before with the filter inside. I like the pull better than the push anyway and not much for the extra weight on the fan side inside the tent. Still gonna be hot though.. need a robot to close the vents when I can not make it lol. Any recommendations on filter placement?
 
LeafGnosis said:
Thanks, that was before she was running, had the hps bulb in to make sure it fired up in case of possible return. Right now I do not have any ducting on the right side, until I flip that is. Since the height will be at it's lowest when flipping, I can cut the ducting to size and connect to the filter. That seems that it will still bend... but shorter distance.... I have seen the set up online before with the filter inside. I like the pull better than the push anyway and not much for the extra weight on the fan side inside the tent. Still gonna be hot though.. need a robot to close the vents when I can not make it lol. Any recommendations on filter placement?
Click to expand...

i like to put the filter either strapped to one of the top beams or on the end of the reflector itself. no ducting needed if its on the end of your of your reflector. ive got mine ducted pushing through the carbon filter. its not the best way of going about it but its what i could do with what i had on hand.
 
drolove said:
i use both powder and gel. one or the other probably would work but i double up to make sure they root lol.
i got a aero cloner as well but never had any good luck with it but i think it was due to high water temps in it.
Click to expand...

Yeah the water temp is the main thing that holds it back.
Thats why in the winter I put it out in the garage on the floor. Roots come 2x as fast as summertime. Summer I add ice to it.
 
bassman999 said:
Yeah the water temp is the main thing that holds it back.
Thats why in the winter I put it out in the garage on the floor. Roots come 2x as fast as summertime. Summer I add ice to it.
Click to expand...

i was gonna use frozen water bottles. freeze 3 or 4 of them and switch them out
 
drolove said:
i like to put the filter either strapped to one of the top beams or on the end of the reflector itself. no ducting needed if its on the end of your of your reflector. ive got mine ducted pushing through the carbon filter. its not the best way of going about it but its what i could do with what i had on hand.
Click to expand...


That's how i do it... Put the ducting into the carbon filter a few inches past the flange, and tape heavily with foil tape to seal it up. Makes a permanent attachment for a bit of ducting, but I replace carbon filters after 2 runs anyway and only use a foot or so between the filter and the fan.
 
Sr. Verde said:
That's how i do it... Put the ducting into the carbon filter a few inches past the flange, and tape heavily with foil tape to seal it up. Makes a permanent attachment for a bit of ducting, but I replace carbon filters after 2 runs anyway and only use a foot or so between the filter and the fan.
Click to expand...

ehh i replace them as needed. where im at now smell isnt even that big of a issue
 
hey everyone im growin 7 plants with my 1k light in a 4x4 room the plants are growin huge as this is 2 weeks from flip wat is my light per sq ft or how much bud can i get from that setup estimates plz any comments .... this is my 1st full grow wit a light system nd jus got my tent, thank youuu all
 
post a pic.. yield depends on how well your doing 8).. :lol:

id probably expect at least .5g /w if your not too sure what your doing... .8 if your pretty good.. and 1 when you have it dialed in..
 
hey i did a huge cfl grow worth 400watt worth and got a few oz but i have a 4x4 wit insulated ducting exhausting out the 1k cool tube this is my 1st real light system i wanted to go big... pics will be uploaded later but there stretchin nd an have gotten so big + they healthy girls
 
Um im new with all the growing and stuff. can anyone tell me if im doing a good job or not on my plants? ill show some pictures. anyone have an tips or advise for me?IMG-20121212-00065.jpgIMG-20121212-00067.jpgIMG-20121212-00066.jpgIMG-20121212-00063.jpg
 
Sr. Verde said:
post a pic.. yield depends on how well your doing 8).. :lol:

id probably expect at least .5g /w if your not too sure what your doing... .8 if your pretty good.. and 1 when you have it dialed in..
Click to expand...

I never really got close to the elusive 1gpw, might be strain and growing technique more than anything.
I think.75 gpw is as close as I have gotten, and I might be over estimating still.
 
bassman999 said:
I never really got close to the elusive 1gpw, might be strain and growing technique more than anything.
I think.75 gpw is as close as I have gotten, and I might be over estimating still.
Click to expand...

I pulled .88 with 250 w SCROG. Which is the lowest efficiency bulb lumens/watts ratio :)
 
You must log in or register to reply here.

Similar threads

O
Attempting the First Grow
2
Replies
33
Views
3K
Old Gorilla Farmer
O
F
I am going to be growing my 4 girls, I had a yr off. Last grow 2 decent plants, considering the temperatures. Using old seeds! Canada East coast.
Replies
2
Views
214
GemGrows24
GemGrows24
AJ’s_stash
First indoor tent grow..help
Replies
16
Views
899
AJ’s_stash
AJ’s_stash
ConnManyThings
Sealed/Hybrid? Best Stealth Intake Options?
Replies
2
Views
281
Rocket Soul
Rocket Soul
Absorber
Absorbers Bell Syphon Grow
5 6 7
Replies
135
Views
6K
Absorber
Absorber
Back
Top