Welcome ladies and gents to FP's cloning method with step-by-step instructions.
You will need:
Shot glass
Bontone rooting powder
Something to mix with
Razor blade
Short glass/mug
Prepared soil medium (moist) in solo cups (with a hole about 1 1/2 to 2 inches deep. I like to use the end of a bic pen.)
Grab your rooting powder and a shot glass. Pour a small amount of water (about 1/2 inch or less) into your shot glass.
Start adding small amounts of powder and mix it well.
Keep adding powder to your mixture until you have the consistancy of slurry/paste/yogurt.
Set your mixture aside and return to the parent plant with a mug of water.
Use one of the lower branches for your clone. Cut between the main stem and the branch's first node.
Immediately place the stem of your cutting in the water.
Set your mug with cuttings next to your prepared mixture. Make sure your soil cups are nearby as well.
With your razor blade in hand, gently hold your cutting out of the water. Use your razor blade to remove the bottom node's leaves and branches. Scrape away the outer skin of the stem.
About an inch should do it. Be careful not to cut all the way through.
Put a nice thick coating of rooting paste all over the length of your scraped stem. Really get it on there.
Place the stem into your premade hole and firm the soil around it for support.
Rinse and repeat. Be sure to label which clone came from which parent.
Mist the leaves and mist your humidome. Cover clones. Place under a low intensity light.
About twice a day, remove the dome and remist everything.