budbro18
Well-Known Member
Built a mini cab out of b&w poly and some 2x2s (1.5"x1.5") Its dimensions are (L)1.5'x(W)2'x(H)3.5'
Total cost was about $20 because i already had the b&w poly and a few fans. But with that it would probably be under $50. Plus the light for about $75 and youve got a good runnin box for about $150.
It has a floralux 150w hps in there with the 4" flange and ducting connected to a 4" duct fan.
For intake i have a ~5" desk fan that i modified to be mounted on the side by the window to pull in fresh, cool air.
I still need another exhaust because i have too much positive pressure and if i shut the cab with the velcro it works the intake fan alot and i dont want it to burn out.
QUICK NOTE: Take your fans apart and lubricate them every 6 months or so. It will make them last forever and keep them at peak cfm.
I have one Auto Cheese by Dinafem that i started about a week ago. Popped in 2 days and was transplanted into the soil after that. I plan to let it go for 2-4 weeks then start a non-auto plant so it can veg for 2-4 weeks or so before i flip it to 12/12 so i have a nice back to back harvest for the first run. Ill post some pictures of it later.
Here are some of the cab in construction.
Frame with the top wrapped and the light mounted.
One side wrapped with the intake fan installed.
Everything but the bottom is wrapped. Before velcro and final stapling to secure the b&w poly.
Ive got a bunch of different seeds i plan to run after this auto cheese and might even try out some 12/12 from seed shit.
Feel free to ask any questions or leave any comments.
Total cost was about $20 because i already had the b&w poly and a few fans. But with that it would probably be under $50. Plus the light for about $75 and youve got a good runnin box for about $150.
It has a floralux 150w hps in there with the 4" flange and ducting connected to a 4" duct fan.
For intake i have a ~5" desk fan that i modified to be mounted on the side by the window to pull in fresh, cool air.
I still need another exhaust because i have too much positive pressure and if i shut the cab with the velcro it works the intake fan alot and i dont want it to burn out.
QUICK NOTE: Take your fans apart and lubricate them every 6 months or so. It will make them last forever and keep them at peak cfm.
I have one Auto Cheese by Dinafem that i started about a week ago. Popped in 2 days and was transplanted into the soil after that. I plan to let it go for 2-4 weeks then start a non-auto plant so it can veg for 2-4 weeks or so before i flip it to 12/12 so i have a nice back to back harvest for the first run. Ill post some pictures of it later.
Here are some of the cab in construction.
Frame with the top wrapped and the light mounted.
One side wrapped with the intake fan installed.
Everything but the bottom is wrapped. Before velcro and final stapling to secure the b&w poly.
Ive got a bunch of different seeds i plan to run after this auto cheese and might even try out some 12/12 from seed shit.
Feel free to ask any questions or leave any comments.