Recent content by censorship

Hello, I used plant material to make hash with ice and bags. Didn't came out much , about 2g from a decent chunk off material. So i came up with the idea to keep the liquid and let it evaporate. This liquid was filtered 2times trough 7different mesh bags. I forgot a bit about it, and now after...

The biggest one is chopped down and weighs 260g wet. Looks very dense ! Not like the others. I'm hoping on 60 Dry. time will tell. So still 3left, i guess they will be for next week. I expect those 3 to be also nice harvests. Totally already 170g being cured from the previous ones. I must say...

Day 84 From green to yellow :) Finally i've cutted down the not flowering ones.. Since i realised to less time will be there to let them finish their long flowering period. (i'm going on travelings for a while in a bit so .. ) Should have done this MUCH earlier to get a more even light...

So i don't give them nutes. Only the hard water. Where the other ones don't get a lock out, those 2 get it .. I also highered the lights a bit. + I did not gave them lots water yet. Only when box is feeling dry and looking dry. ( i can look trough box)

I'm heaving some problems on these plants. They are already 50days or so. I've used 2 older leds. Not really happy about those. Like my viparspectra much better. My previous plants also struggled under these leds. Until they were placed under the viparspectra's R900, then they strived. I was...

Day 76 Reorganization + hung the light higher for better coverage, should have done that earlier .. The 2thinnest ones are still swelling. Still hoping they turn out a bit dense like the 2 bigger ones. 2 Not flowering still alive. Could someone advise me on this ? I was thinking on covering...

Newcomers under the cobs since yesterday. The build seems very nice. NO NOISE from the fans like all the leds have. It's cooler then my 2previous leds. ( +- 2°C colder) Hovering at 18°C-23°C One thing that is a bit a pitty for me. Because the air filter sucking air , the tent is vacuming ( i...

Update; Drying room As you can see , i'm a bit experimenting with the drying process. Some are already trimmed a bit, others ive trimmed after a while since there is not that much room in the closet and others are around the corner to be harvested :) These were the smaller ones/mongols. The...

I recently bought a closet for drying. Drilled a hole in both sides. One attached to the growing tent ( sucking air -> trough the carbonfilter = peace ) I'll also use it to germ/veg later on :)

Its already 8days later.. Some are chopped and being dried. (only the small ones) Made a small drying/sprouting/pre veg room. Connected the air inlet to the bigger tent since that's needed for drying properly. Made a COB 300w set (clu048) That one goes in the small tent tonight or tomorrow...

9 Days later .. Was fun to build. Shipment was very fast. Total for the 300w 287€ Duty fees were only 35€ + 30€ for the frame = 352€ Some things could be done better afcorse, but i don't have the materials for that. I had to make it on my dinner table lol. Made a kind of heatsink for the...

Time for an update Day 62 Biggest one have been swellen alot. Looking like dense buds to me. The big one next to it is a bit later , but i'm seeing good activity over there also, shes following So this is a bummer that pictures sometimes come upside down but .. they are the ones in front of...

Yes , after doing research the 1212 seemed a good option. The vero & cxb are more expensive so i'd rather skip those if not needed ;) I'm from Europe indeed. I've read some posts about orders that didn't had to pay those taxes so that's what i'm hoping at. Also said i got in touch from...

Thanks for the input. I'm having a spectrabox laying in here that has 2 drivers for 3 fans each. So i was thinking on using that one. On the other side, think i'm going to follow you guys advice this time. You both probably know it better then i do and i don't want to change things after i...

Some years ago i started with CL tubes. This changed to HPS. Then i stopped for some years with growing and after turning back to this nice hobby.. I popped in the world of led, bought some old leds that where supposed to do great in the past. But it seems that they aren't that great and...