Search results

I already helped you with that. Those guys are just posting extra questions. It's a pH imbalance. Good day.

I'm assuming if you do it shortly after watering a pH strip will work just fine. Try and see. Or you could just test the pH levels of the water you're using and adjust if needed. A pH, Light exposure, and Moisture all in one meter is only 7-8$ Definitely a good investment unless you're really...

Also, if and when you transplant to a bigger pot, I recommend either Schultz Pro Potting soil or Foxfarm. Really great soils and if youre in the states, it should be sold locally as well.

Any local hydroponics/gardening store near you. Same for the dolomite lime. Try maybe a Home Depot, Ace Hardware, or simply search "Hydroponics" or "Gardening" through google maps followed by your area code.

Well usually yellowing spots is caused by either your pH being too low, or too high. So get a pH meter and some Dolomite Lime and keep the pH between 6 and 7.5

My first guess was that you were misting them while the lights were on making little burn spots, but if that's not the issue, then what are you feeding them?

Are you spraying the plant with anything?

Good to know

Looking just fine budboyste. Keep it up.

It really wouldn't make a huge difference imo. Might as well just stick with the 12/12.

You should think about lollipopping the plant, as those lower leaves aren't looking too great and at this point they're just wasting valuable energy and nutes. If you don't know what lollipopping is, it's essentially cutting off the lower leaves and leaving only the top healthy cola and...

What kind of nutrients and soil are you using?

Well you're wrong about me lying for one, and I currently have the lights set up horizontally. My cousin did the wiring and he said it's more than good enough to handle the load. You are right about me being new, but I've been educated on what plants need to grow fast, big, and healthy. If...

Lemme get some grower opinions in here and maybe I'll throw up a link.

So I am currently vegging 30 plants and I have 10x1kW HPS lamps spaced in a 12'x10' room one per meter squared. Technically meaning I'll have 1kW per square meter of plants once they're ready to flower and I was just wondering if I could get a few experienced grower's opinions on how many grams...

Thanks for all the tips stupidclown, you've helped a bunch.

Well (I'm only assuming) I'm pretty sure that I can convert to bio-diesel or even used fry-grease increasing hpg(hours per gallon) and costing me nothing to get for free from the hundreds of local fast food joints that throw it out at the end of each week leaving the work for me being running it...

Okay, so I did some local generator browsing and found a LIMA 15kW generator which is conveniently run on diesel, has a high reliability rating, doesn't have any exposed laminations or moving parts, is pre-muffled and it'll have 5kW more power than my lights will require. They're able to run...

Okay. So for one, I'm going to get the most expensive cables and sockets I can and have read several soundproofing posts for generators. If I need to buy a higher output generator, then I will. I'm not that stupid XD Tell me what to do to be as close to fire-proof as possible with the wiring...

So I'm going to be hooking up 10 1000watt hps lights to a 12000watt generator soon and need to know how to wire it up to new sockets for all my lights. Try to make it as basic and in depth as possible as far as equipment goes because, I'm no electrician and I want to do it right.