Search results

cut it Look for the hair to turn from white to orange, look for around 10% amber trichromes 90% cloudy. under natural light it will look white.

could be mites check with a mag glass, if not id look into root issues. let the plant dry back then give it plain ph water and test the run off .

Also got the package, these are all regular seeds correct no fems?

Awesome man, The 79 pro is a great option im thinking of grabbing one to free up a controller =)

how much

Hi i want to try some Dirt Stick

Get the UIS control outlet , it will also power the controller.

I want to try that Ghost Bomb

I just hang mine off the bottom of the middle shelf.

If you are not maintaining temperature inside and your outside temp is constant then you need to back off the humidifier the temperature is far more important for preventing mold. I am cutting down and loading directly into mine with stems. If you are using a ACI controller just use the Cycle...

I have a 120mm fan in both.

Got to start smoking the donutz triploid today and well my pheno might not have balls but it doesnt taste like a donut ether, its just kinda bland mediocre high mostly in the face. putting it in the jar for happy cure time maybe something will happen but so far not impressed. Now my mixed nutz...

Ill try and get you a photo, but its just sat in the bottom with the cold side down in the center back of the unit.

Here is a better option rather then tape Safe option

Im not sure what unit you are using but the koolatron 20 and the bigger unit are foam insulated

I just have mine sitting at a angle everything is draining fine for me but check the thermal electric heat-sink in the back, make sure everything is tight mine leaked a tiny bit. I also used these for my hole inside and out. Hole grommet

I have not cut the bottom

You just use UIS control plug to control the dehumidifier im currently using 2 one for the dehum and one for the circulation fan. you can also just leave the fan on all the time. so you really only need one.

Bigger unit

Just a quick update: The bigger unit works great in fact i think its holding temps a little better then the smaller one. I did have a small problem where the condensation on the cooling unit was leaking out the back down into the tray instead of inside. just needed to tighten up the mount and it...