Search results

They are 600w Quantum digital ballasts with the 50%,75% and 100% power settings.

Thats it...just brush it on and let it dry and cure. Usually about 4 or five days to cure. It will be a little tacky for several weeks but you can still use it that way. As far as sanitizing it, I just make a H2O2 and water solution, spray, rinse, repeat

When your res starts to get low, just top it off with water and adjust the ph level untill its time to change the entire reservoir (usually every 10-14 days)

I have two 4'x8' flood and drain tables in my flower room that I run SOG in. I tried several different light combos with 1000w and 600w lights and I achieved the best results running 3 x 600w in cool tubes over both tables. You could possibly center your 1000w in the middle and put a 600w on...

Try getting a cheap plastic spagetti/ veg strainer and set in the bottom of the bucket. This will basically be a catch basin for the roots and keep them from being sucked into your drains. You could probably do the same thing with a cheap plastic bowl that fits into your 5 gal bucket but you...

Do you have a washer and dryer in your condo??? If so, is the dryer a 110 or a 220/240 amp circuit? Dryers run on their own dedicated circuit which is usually 30 amps. If so, Then you may be able to use this circuit for your heavy amp load devices. If the dryer is a 240...they make units that...

And this is why... If your 15 amp circuit breaker keeps tripping after awhile it is due to the circuit pulling more electricity than the wire in that circuit can handle. When this happens the wire (circuit) starts to overload and builds up excessive heat in the circuit and the thermal protection...

I sprout my seedings with CFL'S. I think hid lighting on seedlings is over kill. In fact, I've got some purp, ak48, white castle, A.I., bubblegum, Sin, and Eve seedlings under CFLs now. I do all my cloning under cfl's and one well rooted They veg under high output T-5 's or a 600w quantum set at...

Yeah , it's just 1x12's....I put on 3 coats of brite white kitchen and bath paint that resists mold and mildew from Lowes. And since the flood stage is regulated to drain when the water gets about an inch from the underside, there is really no issue with the boards getting water logged. I've...

Nirvana's AK48

Forgot some clone porn....these are all 100% from clones.

Don't know where your friend got his info but he don't know what he is talking about. If I were you I'd find a new friend that grows and has some grow knowledge and common sense A clone is an exact genetic copy of the mother plant (donor plant) Why would it produce less than the seed of its...

This morning I cut out the tops on one of my SOG tables in the flower room and trimmed them and then I bottom pruned about a hundred plants in my other SOG table. Don't seem like I did much but that was an all day affair.

Here is a few I built for my mothers and veg area. I built mine from... 3/4" plywood cut in half 2 - 2x6's (for sides) 2 - 2x4's ( for table legs) 1 set of drain and fill fittings (hydro store) 35 gallon tote for resv 1-timer 1- pump (250 t0 300 gph will work) various wood screws and...

Yes you can recirculate your air thru your carbon filter in your room. And you do need to bring in fresh air in your room to give your plants their needed CO2. And your a/c does not bring in any fresh air from outside of your room. It just recirculates the old air after it has been cooled.

I use this to clean my hydroton. Its a small portable cement mixer I bought at Home Depot. I also use it to tumble my ice hash. It is a great multitasker. It also mixes cement...lol

I've always used hydroton since I started doing hydro with buckets and netpots. Just sorta stuck with it. I tried just using neoprene collars and no hydroton once...and when the table flooded a lot of the clones would lean to one side since there was nothing to kinda hold them in place in the...

I can water proof five or six 4'x8' tables with one five gallon pail of BlueMax liquid rubber depending on how thick you spread it on and how many coats you apply. I did a thread in the DIY section on my flood and drain tables about 5 or 6 weeks ago, you should have no problem finding it if you...

Hey VV...Nice thread, I also make my own DIY flood and drain tables and thought I would pass this along to you and your subscribers. Instead of lining your table(s) with pond liners or plastic, I have been using a liquid rubber called BlueMax made by http://www.amesresearch.com/ It goes on easy...

Nothing beats the munchies like a box of organic Hemp granola bars. My girl gets these at Big Lots and they are de-lish!!