jesster8459
Active Member
Included Parts:
The cabinet in total is about 35 by 69 inches.
I have the carbon filter hooked up to my 4inch exhaust fan which is on top of the box and the ducting runs threw the top of the box to the exhaust fan then ducting from the exhaust fan strait outside with a outside vent covering the exhaust. Also have two 4inch duct fans located at the bottom sucking in colder air. Finally the whole box is covered in white panda film, and the top the DWC has duct taping for reflection.
Not sure on nutes yet. Money is a bit tight but eventually will be running fox farm nutes.
Any comments or advice or critizim is helpfull and appreciated.
Tell me what ya think!!!
Pictures will be on the next post...
- 2-4inch duvt fans (80cfm each) Intake fans
- 4inch active air fan (170cfm)-exhaust fan
- 4by12in active carbon filter
- 150w hps
- 2-2ft t5 flourscent lamps
- 6 pot DWC
- Air pump with 12inch air stone
The cabinet in total is about 35 by 69 inches.
I have the carbon filter hooked up to my 4inch exhaust fan which is on top of the box and the ducting runs threw the top of the box to the exhaust fan then ducting from the exhaust fan strait outside with a outside vent covering the exhaust. Also have two 4inch duct fans located at the bottom sucking in colder air. Finally the whole box is covered in white panda film, and the top the DWC has duct taping for reflection.
Not sure on nutes yet. Money is a bit tight but eventually will be running fox farm nutes.
Any comments or advice or critizim is helpfull and appreciated.
Tell me what ya think!!!
Pictures will be on the next post...