Whats up fellow Greenthumbers out there. I am starting a 2k watt grow and I am using bubba Kush as my primary strain. I am equipped with the following:
-3x6 flood tray w/40g reservoir
-2x 1000 watt hypotek digital ballast
-8" Hydrofarm hoods w/ 8" inline fan
-Xgc-1e greenhouse controller
-20lb co2 tank w/ regulator
-two oscillating fans and one floor fan to keep co2 from resting on the floor
-Tri meter which I do not like very much as the digital ballast effect the readouts.
I plan on adding two 4x4 trays with a 100 gallon shared reservoir in a few days and putting a 1k watt over each two trays so I would have total of 4k watts in one room. I don't have exact dimensions on room but I would say it's 14x14.
I am running a sealed room and I just transplanted the clones to the 6 inch rock wool cubes. The clones are between 4-6 inches but I'm maintaining 18/6 until they grow an inch or two then I'll throw them into flower 12/12. cutting edge nutrients are what I use to fertilize. I have the Micro, grow,bloom, uncle johns blend, plant amped, mag amped. my ppm are at 1100 and I only use RO water from my hydro logic stealth 100 that feeds a 65 gallon barrel. I put two clones into drip feed buckets to use as my mothers under 24hr T5's.
I don't really have my watering schedule down as I just started it but I am starting with 10min on once a day during daylight period. I will adjust depending on the plants needs. any feedback and help is appreciated and criticism is always welcome
-3x6 flood tray w/40g reservoir
-2x 1000 watt hypotek digital ballast
-8" Hydrofarm hoods w/ 8" inline fan
-Xgc-1e greenhouse controller
-20lb co2 tank w/ regulator
-two oscillating fans and one floor fan to keep co2 from resting on the floor
-Tri meter which I do not like very much as the digital ballast effect the readouts.
I plan on adding two 4x4 trays with a 100 gallon shared reservoir in a few days and putting a 1k watt over each two trays so I would have total of 4k watts in one room. I don't have exact dimensions on room but I would say it's 14x14.
I am running a sealed room and I just transplanted the clones to the 6 inch rock wool cubes. The clones are between 4-6 inches but I'm maintaining 18/6 until they grow an inch or two then I'll throw them into flower 12/12. cutting edge nutrients are what I use to fertilize. I have the Micro, grow,bloom, uncle johns blend, plant amped, mag amped. my ppm are at 1100 and I only use RO water from my hydro logic stealth 100 that feeds a 65 gallon barrel. I put two clones into drip feed buckets to use as my mothers under 24hr T5's.
I don't really have my watering schedule down as I just started it but I am starting with 10min on once a day during daylight period. I will adjust depending on the plants needs. any feedback and help is appreciated and criticism is always welcome