3 gallon buckets

S

sgrowdum

Well-Known Member
Feed to waste HPA. Aeromist 300psi pump with .008 sprayers in each bucket. It will be more of a fog than a mist to be honest.

With that said I think I'm going to go another route becuase the sprayers are like $4 each and I would need 50 or so buckets to fill my 8X8 tent. I'll probably make a thread about it in here. Im probably going to run 2 3X6 trays back to back in the 8X8 tent and use the same aeromist pump.
 
Last edited:
V

VegasWinner

Well-Known Member
Airwalker16 said:
How do you plan on doing aeroponic in individual buckets?
Click to expand...
I do aeroponic in individual buckets. I run about 12 buckets with seperate pumps and I use a 360 clone spinner no longer available on the market. Each bucket can hold one to four plants depending on strain. Is easier than running rezs like before I can individualize feeding easier thru veg and bloom. I just unplug a bucket from the veg room move it to the bloom room and plug it back in to timer and change feeding schedule as needed. I let them run good and low and don't top off. Peace
 
Airwalker16

Airwalker16

Well-Known Member
VegasWinner said:
I do aeroponic in individual buckets. I run about 12 buckets with seperate pumps and I use a 360 clone spinner no longer available on the market. Each bucket can hold one to four plants depending on strain. Is easier than running rezs like before I can individualize feeding easier thru veg and bloom. I just unplug a bucket from the veg room move it to the bloom room and plug it back in to timer and change feeding schedule as needed. I let them run good and low and don't top off. Peace
Click to expand...
Like a diy cloner? Bucket filled to just below spray head sprayinn by a submersible pump?
 
HydroRed

HydroRed

Well-Known Member
VegasWinner said:
I do aeroponic in individual buckets. I run about 12 buckets with seperate pumps and I use a 360 clone spinner no longer available on the market. Each bucket can hold one to four plants depending on strain. Is easier than running rezs like before I can individualize feeding easier thru veg and bloom. I just unplug a bucket from the veg room move it to the bloom room and plug it back in to timer and change feeding schedule as needed. I let them run good and low and don't top off. Peace
Click to expand...
I remember the clone spinners from like the mid 90's. Looked like little sprinkler heads vs just being atomized through small holes in sprayheads like they have now.

Edit: I see they still make the ones I'm thinking of. Shows you the last time I used em haha
http://www.greenerhydroponics.com/Aeroponic-Clone-Spinner-360_p_76236.html?gclid=CMXvqMrkjc8CFRAvaQodT3IHAQ
 
Airwalker16

Airwalker16

Well-Known Member
HydroRed said:
I remember the clone spinners from like the mid 90's. Looked like little sprinkler heads vs just being atomized through small holes in sprayheads like they have now.

Edit: I see they still make the ones I'm thinking of. Shows you the last time I used em haha
http://www.greenerhydroponics.com/Aeroponic-Clone-Spinner-360_p_76236.html?gclid=CMXvqMrkjc8CFRAvaQodT3IHAQ
Click to expand...
Yes or these of course.


http://www.greenerhydroponics.com/EZ-Clone-360-Sprayer-Red-_p_76064.html
 
HydroRed

HydroRed

Well-Known Member
Airwalker16 said:
So do those just thread directly into pvc?
Click to expand...
The ones I used back in the 90's were barbed for I believe 3/8 or 1/2" id. They make barbed and threaded, but as a diyer I always went with the barbed. Then they aren't meant for any one specific brand/model of unit.
 
S

sgrowdum

Well-Known Member
I like the little red ones you screw into the pipe. They get a great spread and are far less complicated.
 
HydroRed

HydroRed

Well-Known Member
Yesdog said:
my god are those nice looking roots
Click to expand...
Thanks! No hydroguard or anything like that. I just run a steril res and keep it clean with 8ml H2o2 (3% drug store stuff) per gal every 3 days or so. City water added right from tap.
 
You must log in or register to reply here.
Top