alwayslearning777
Well-Known Member
So I am planning on moving, So my original set up is getting taken down and the room re-done ... I have a 4x4 tent that I am going to pop up just to keep a few going while I make my way through the home selling / buying process, I am used to having wide open spaces so this tent is sort of a whole new deal for me. I will put my plan below and anyone with experience using a tent this small please let me know your ideas, thoughts, tips and advice...
I am going to run one of my 1Ks .. I was thinking MH so I don't have to deal with a stretch, but I believe MH burns at a hotter temp. and I think heat is going to be my #1 enemy with this setup.
I plan on venting my hood in and out of the tent, or should I just pull air out and leave one side of the hood in the tent open so it can possibly pull the hot air out ? I am debating running my CO2 and I know that will help with heat stress so if leaving one side of the hood open and in the tent will not make much of a change in temp I will go the CO2route
I have a free standing AC, and central AC... I obviously can not fit the free standing AC in the tent if I want more than a half of a plant so I am planning on going to the depot and rigging up a register that I will seal over the condenser fan that blows out the cold air ( its a rectangle ) and then using a series of anything I can find reduce it to a round 8 inch, so this question is for anyone with HVAC experience... this will more than likely reduce air flow, do you think It will end up icing the condenser up ? My other thought was just using my central AC and popping a hole in the bottom of the tent, putting it on top of the register and hope it cools the tent down, cold air sinks so I do not know if this would be the best option... it would be the cheapest though because with summer coming I will be using the central AC regardless... Thoughts ?
I got the tent on a trade so have no real info on it , I personally do not trust hanging my hood from it (raptor XL) I was going to still hang the light from the ceiling... do you think it will support the light without issue, I sort of hung from it but didn't put all my weight on it, I'm on the fence about it...
In your opinion, what would be the best method to use ? build a mini screen, SOG, or just rock em ... I use the SCROG method with great success but was thinking about SOG since I will no longer have to worry about my limit on plants. If I ran a SOG I probably would not have to veg much so that is a plus, or I could just rock a single plant and train it to be a monster, open to suggestions on this one....
I was also thinking about trying something completely different from what I usual do, I usually grow in soil, since I will not really be taking clones anymore I was thinking about attempting to use my cloner (Homemade) and try to grow out of that.. sounds crazy but the cloner is giant, its like a 35 gallon tub( that is a guess but its 3.5ft long by 2.5 wide by 2.5 deep) that I rigged up with some PVC and mister nozzles (21total) never used any hydro or aeroponics or what ever that is considered but it was a thought, do you think it would be worth a try or not, I only imagine I will be getting 1 maybe 2 harvests out of this so if it is something that you need experience to dial in then I may stick with what I know, I just thought about the water temp too, that may be a pain so I may stick with what I know ...
I think that is it, I am sure I will have more questions as I start to really set it all up but im still 2-3 weeks out from firing that up, so anything that you guys and gals can help me with I would greatly appreciate, thanks again
-Jonny5
I am going to run one of my 1Ks .. I was thinking MH so I don't have to deal with a stretch, but I believe MH burns at a hotter temp. and I think heat is going to be my #1 enemy with this setup.
I plan on venting my hood in and out of the tent, or should I just pull air out and leave one side of the hood in the tent open so it can possibly pull the hot air out ? I am debating running my CO2 and I know that will help with heat stress so if leaving one side of the hood open and in the tent will not make much of a change in temp I will go the CO2route
I have a free standing AC, and central AC... I obviously can not fit the free standing AC in the tent if I want more than a half of a plant so I am planning on going to the depot and rigging up a register that I will seal over the condenser fan that blows out the cold air ( its a rectangle ) and then using a series of anything I can find reduce it to a round 8 inch, so this question is for anyone with HVAC experience... this will more than likely reduce air flow, do you think It will end up icing the condenser up ? My other thought was just using my central AC and popping a hole in the bottom of the tent, putting it on top of the register and hope it cools the tent down, cold air sinks so I do not know if this would be the best option... it would be the cheapest though because with summer coming I will be using the central AC regardless... Thoughts ?
I got the tent on a trade so have no real info on it , I personally do not trust hanging my hood from it (raptor XL) I was going to still hang the light from the ceiling... do you think it will support the light without issue, I sort of hung from it but didn't put all my weight on it, I'm on the fence about it...
In your opinion, what would be the best method to use ? build a mini screen, SOG, or just rock em ... I use the SCROG method with great success but was thinking about SOG since I will no longer have to worry about my limit on plants. If I ran a SOG I probably would not have to veg much so that is a plus, or I could just rock a single plant and train it to be a monster, open to suggestions on this one....
I was also thinking about trying something completely different from what I usual do, I usually grow in soil, since I will not really be taking clones anymore I was thinking about attempting to use my cloner (Homemade) and try to grow out of that.. sounds crazy but the cloner is giant, its like a 35 gallon tub( that is a guess but its 3.5ft long by 2.5 wide by 2.5 deep) that I rigged up with some PVC and mister nozzles (21total) never used any hydro or aeroponics or what ever that is considered but it was a thought, do you think it would be worth a try or not, I only imagine I will be getting 1 maybe 2 harvests out of this so if it is something that you need experience to dial in then I may stick with what I know, I just thought about the water temp too, that may be a pain so I may stick with what I know ...
I think that is it, I am sure I will have more questions as I start to really set it all up but im still 2-3 weeks out from firing that up, so anything that you guys and gals can help me with I would greatly appreciate, thanks again
-Jonny5