Shroominnm
Well-Known Member
I started about 2 months ago, we got a new house and it had a nice metal shed out back with bare wood framing (2x4s)
The shed is 12 deep by 8 wide.
There had been electrical at one time but must not have been up to code when the house was sold because it was disconnected.
I stripped all the old wire.
I insulated all of the walls and the ceiling, and then i built a partitioning wall 4 feet into the shed going from left to right.
I completely insulated this wall also.
While building this wall i added a box fan in it, placed right in front of the huge air conditioner (450$ at lowes last year) for my intake air.
This works great!
I framed the wall so that i can add one more box fan if i need, and cut out the siding around one face where the fan Is for easy access inside the wall.
In the meantime i ran new electircal all the way through, with outlets in the walls and the ceiling.
I have just about finished the room in the last couple weeks. I seperated the 8x8 room into two 4x8 rooms, divided by a 2x4 frame with a tarp
I got my co2 regulator, timer, and bottle hooked up this week. I had set up a 4 inch turbine through the roof with a carbon scrubber but since adding co2 i have blocked the exhaust vent and scrubbed from one 4x8 back into the other. I also have a fan pulling air through the tarp from one side to the other, then it scrubbed back to to the first room as i said through the 4 in fan. It is scrubbed back into the room that has the box fan.
Thus works okay but will need upgrading.
Sent from my SM-N920V using Rollitup mobile app
The shed is 12 deep by 8 wide.
There had been electrical at one time but must not have been up to code when the house was sold because it was disconnected.
I stripped all the old wire.
I insulated all of the walls and the ceiling, and then i built a partitioning wall 4 feet into the shed going from left to right.
I completely insulated this wall also.
While building this wall i added a box fan in it, placed right in front of the huge air conditioner (450$ at lowes last year) for my intake air.
This works great!
I framed the wall so that i can add one more box fan if i need, and cut out the siding around one face where the fan Is for easy access inside the wall.
In the meantime i ran new electircal all the way through, with outlets in the walls and the ceiling.
I have just about finished the room in the last couple weeks. I seperated the 8x8 room into two 4x8 rooms, divided by a 2x4 frame with a tarp
I got my co2 regulator, timer, and bottle hooked up this week. I had set up a 4 inch turbine through the roof with a carbon scrubber but since adding co2 i have blocked the exhaust vent and scrubbed from one 4x8 back into the other. I also have a fan pulling air through the tarp from one side to the other, then it scrubbed back to to the first room as i said through the 4 in fan. It is scrubbed back into the room that has the box fan.
Thus works okay but will need upgrading.
Sent from my SM-N920V using Rollitup mobile app
Attachments
-
82.9 KB Views: 304
-
67.7 KB Views: 282
-
66.3 KB Views: 272
-
43.3 KB Views: 260
-
70.8 KB Views: 263
-
78.6 KB Views: 270
-
85.5 KB Views: 266
-
68.1 KB Views: 274
-
44.1 KB Views: 273
-
61 KB Views: 264