A ? for HLG Diablo 200 users

T.H.Cammo

Well-Known Member
When using the dimmer; does the whole unit actually draw less power (from the wall) - or does the unused power just go up as heat build up?
 

PadawanWarrior

Well-Known Member
Top Features

  • High efficiency QB648 Diablo Quantum Board ®
  • Full Spectrum for better results
  • Ideal for Veg and Bloom
  • Extended cord for remote driver mounting
  • Internal dimming available
  • 120V Power Cord with Nema 5-15P Plug
You don't know what you're talking about. So please stop giving this guy bad advice. Thanks.

 

shimbob

Well-Known Member
I'm with you, but I'm thinking Input voltage (to the unit) and current to the driver.
If you attempt to place an AC dimmer to the AC input of the driver, the drivers going to have a bad time and will be unhappy.
Its dimmable through an internal adjustment, which works but is not intended to be constantly changed all the time as its made of plastic and will wear out eventually.
 

PadawanWarrior

Well-Known Member
You have a different driver.

If you attempt to place an AC dimmer to the AC input of the driver, the drivers going to have a bad time and will be unhappy.
Its dimmable through an internal adjustment, which works but is not intended to be constantly changed all the time as its made of plastic and will wear out eventually.
The 200 is not dimmable. I would have thought it was too, but that one's not. At least with that driver that it comes with. If you bought a different driver I'm sure you could dim it.

This thread is where we all found that out. It was started by HLG and there's a rep in there too.

 

Boatguy

Well-Known Member
I bought mine when they were offering the stand alone boards, and bought the dimmable driver they recommended. Are they still using a driver that cant be dimmed while advertising it as one than can?
Seems stupid to not use their own driver recommendations for their kit.

I stand corrected if that is the case

Edit: Posts deleted to avoid creating confusion
 

shimbob

Well-Known Member
I've read that thread and nowhere does anyone confirm it can't be dimmed. Frank had issues with turning it up past the max but asides that, it seems if you turn Io down, they... Dim. Turn it back up, they... undim(?). Turn it past a certain point and you're in maxed out driver mode. I know, I have an xlg-240 that freaks out when I turn Io up past 260W, but its still dimmable.
 

PadawanWarrior

Well-Known Member
I bought mine when they were offering the stand alone boards, and bought the dimmable driver they recommended. Are they still using a driver that cant be dimmed while advertising it as one than can?
Seems stupid to not use their own driver recommendations for their kit.

I stand corrected if that is the case
What driver are you using? Is it constant current or constant voltage?
 

T.H.Cammo

Well-Known Member
You guys are talking "a little" over my pay grade! But maybe the "Diablo 200" isn't for me after all. Or maybe they (HLG) have started using the driver that makes sense on their current models.
 
Last edited:

Boatguy

Well-Known Member
What driver are you using? Is it constant current or constant voltage?

HLG-320H-C2100 for 2x QB 648
 
Top