Aero - 1/8th" connections on tefen nozzles question.

Setting up my aeroponics system here, just wondering what you guys use to connect to the 1/8th NPT male thread tefen nozzles?
I basicially have 1/4" john guest tee's and im wondering what to use on the opposite end of that.

You could try HDPE rod. Just cut to length, drill and tap; 1/4" on one end, 1/8" on the other.

Ex. http://www.amazon.com/Density-Polyethylene-Opaque-Off-White-Diameter/dp/B0013HKYR8

use 1/8 x 1/4 tefen reducer coupling from link below. if you look up on tefen website you can find distributors in your country.

http://www.tefenplastic.com/catalogue/product/727

hope this helps and good luck growing

also for the 1/4 inch side you could use john guest stem adapters to your 1/4 inch tee.

http://www.johnguest.com/Home/applications/beverages-and-drinks-dispense/Polypropylene-Fittings/Polypropylene-Fittings---Imperial/STEM-ADAPTOR.aspx

Thanks guys, i auctially ended up using brass bushings with 1/4" JG fip adapters.