Aero Tub Insides Pic??

Talisman

New Member
Anyone have a good pic showing how to construct the pvc with sprayers and pump ect that you would make to put into a say 30 gallon or so roughneck??? Like to see a good way to build one.
 

Talisman

New Member
Somewhere over the rainbow stoners fly... Theres got to be a stoner once in my lulaby. Come on everyone!! There has got to be a pic of a good set up??? PLEASE......:wall:
 

Talisman

New Member
Well that is nice and thanks but I am using pvc with sprayers under the net pots and with around 25 plants in the tub so the tube thing to each pot is not how I want it to go. PVC under with sprayers and the water level below the pvc tubes. I just want a good design for this type of set up and the link you gave is great but not it. So anyone else? You know the type of system I know you do it is out there. Some one please help with a good design for this type! of set up...:wall:
 

Talisman

New Member
Why can I not get a pic of a tube set up? The pvc with sprayers inside a roughneck is what I want to see how best to construct. Not some other systems design, but the one I am asking about. Please don't give me links to more pages that are dwc, or fill and drain or anything else. I want to see the type I want not the type you want. Get it?? Not trying to be an ass but it is just not helpful when you ask how to paint a car and someone sends you a picture of a fruit tree. Bad example? well you get it I am sure. A good set up of pvc inside tubs with sprayers is what I want to see. Seems easy to me but you would be surprised. Trying to get them to sit up and the like. :cuss:
Well that is nice and thanks but I am using pvc with sprayers under the net pots and with around 25 plants in the tub so the tube thing to each pot is not how I want it to go. PVC under with sprayers and the water level below the pvc tubes. I just want a good design for this type of set up and the link you gave is great but not it. So anyone else? You know the type of system I know you do it is out there. Some one please help with a good design for this type! of set up...:wall:
 

srryan2

Well-Known Member
i am working on a aero tub setup but im still wating on the nozzles and boxes for the tubs might be another week or so and than i can takes some pics
 

Talisman

New Member
Yeah did the t shape but can't get it to stand straight so will just have to figure a way to support it. Thanks. Basically I have two air stones and by the time the are 8 inches or less tall it all becomes a DWC anyway. If the roots are hanging in the water do you really need the sprayers on anymore???? thanks... Like I said two big air stones....one tub, no drain just it and itself. Tried the tub on bottome thing but to big a hassle so they grow big in the one and then into the fence posts for the bloom. One last question. Useing bonicare nutes and it clogs, want to switch to GH grow bloom and micro for hard water, do I need the micro? and is it ok to switch from bonicare after when I put them into bloom. If my big tubes get clogged late in flower it is a royal pain in the butt. And also looking to remove my pvc that is in the 6' pvc fence bloom tubes, 50 holes and putting the feed lines outside and running little plastic or rubber? tubes to top holes inbetween the net pots but don't know how to get them into the feed pvc and or the tubes without getting leaks at the insertion points?????
 

Earl

Well-Known Member
Switch to AN or DM nutes
Use the two part.
AN SensiGrow A&B for veg
and SensiBloomA&B for flower
You will never clogg.
Run 50% of the amount AN recommends.
.
 

Talisman

New Member
Thanks but want a reasonable nute $$ and all the rest are so over priced. I have read to many people saying that nutes are mostly just nutes and the over priced ones are just that, over $$$ed. So The tubes out of the feed pvc lines and into the plants tubes how in the heck do you do it without leaks???? Thanks.....kiss-ass
 
Top