BuddyJesus
Well-Known Member
(Pics to come) taking to long to upload atm
This is a first time for me and my friend...please be kind.
The Too Much Closet Space Creep
by Skizofrenik and Buddy Jesus
Thanks to everyone who contributes to these forums...we went into this not knowing what the **** to do. I think we did alright for a couple of newbies.
First off...here we are at closet number one. Painting not yet done, mold work not yet finished to finally concealed, and the closet hanging rod needs to be re-installed.
...Peek-a-Boo!! Industrial strength magnets, and a cupboard magnetic popping lock keeps the door shut and tight, but still allows an opening.
A T5 2 Foot Flourescent light, puttin out 21,000 lumens...accompanied by 4 more bulbs kickin' in 1,600 a piece. Not too bad for a mother/veg room, right? Also a 6" inline duct fan pulling in fresh air at 250 cfm. The big light is on adjustable hangers for convenience. Insulated foam on all the walls and door...a lil mylar in there too. Sound is an issue...the main issue at this point!!! I'm considering getting controllers for the fans to slow them down a bit and lower the volume, some insulation around the fans to minimize vibration....any other pointers? Will adding more layers on the doors insulation do anything to the heat...?
Here's the top of the room. Another 6" inline duct fan pushing out hot air, another oscillating fan...pretty straight forward.
And here's the "door" to closet #2. They're both connected, just seperated by reflective insulation board. This door as of now is the only piece partially painted...eventually the entire interior of the closet will be this dark blue (looks a lot lighter due to flash).
And once the door is opened...600W, air-cooled high pressure sodium sun-light. Another 6" inline duct fan, 250 cfm, venting out the room with a can-air carbon filter, 26" length 12" diameter with a total carbon weight of 31lbs. I'm hopeful this will take care of my odor problem?
Well that's about it for now...I'm going to make a lil post about the growth of my lil guys...
Until then...
CIAO!!!
First off...here we are at closet number one. Painting not yet done, mold work not yet finished to finally concealed, and the closet hanging rod needs to be re-installed.
...Peek-a-Boo!! Industrial strength magnets, and a cupboard magnetic popping lock keeps the door shut and tight, but still allows an opening.
A T5 2 Foot Flourescent light, puttin out 21,000 lumens...accompanied by 4 more bulbs kickin' in 1,600 a piece. Not too bad for a mother/veg room, right? Also a 6" inline duct fan pulling in fresh air at 250 cfm. The big light is on adjustable hangers for convenience. Insulated foam on all the walls and door...a lil mylar in there too. Sound is an issue...the main issue at this point!!! I'm considering getting controllers for the fans to slow them down a bit and lower the volume, some insulation around the fans to minimize vibration....any other pointers? Will adding more layers on the doors insulation do anything to the heat...?
Here's the top of the room. Another 6" inline duct fan pushing out hot air, another oscillating fan...pretty straight forward.
And here's the "door" to closet #2. They're both connected, just seperated by reflective insulation board. This door as of now is the only piece partially painted...eventually the entire interior of the closet will be this dark blue (looks a lot lighter due to flash).
And once the door is opened...600W, air-cooled high pressure sodium sun-light. Another 6" inline duct fan, 250 cfm, venting out the room with a can-air carbon filter, 26" length 12" diameter with a total carbon weight of 31lbs. I'm hopeful this will take care of my odor problem?
Well that's about it for now...I'm going to make a lil post about the growth of my lil guys...
Until then...
CIAO!!!