I am using a autopot geopot (fabric) for the first time this grow. I was using drain to waste coco before and while I had awesome results that way I just wanted to try something different.
I have to say that this autopot is working great. I honestly don't have much at all to do except add to the reservoir occasionally. I was worried about leaks so I did set the autopot tray in an old tote I had just in case but I've had no leaks at all. The only "issue" I've had is around mid flower I checked the valve area and found roots had grown through the pot sock and were growing well into the tray. I was able to just remove them before any issues happened. The pot sock is lined with copper and was supposed to prevent any roots escaping but it didn't work in my case.
Since I'm only running one plant for now, I've never filled the reservoir with its 12 gallon capacity. Only 3 gallons at a time. Even with the plant feeding heavily, I only had to add about every 3 days.
Honestly, this grow has gone so well, I ordered another base and a couple more fabric pots so I will run two plants after this one is done. I plan to continue setting the bases in the tote just in case. I've had not issues with nutrients clogging up the lines. My system is the 3/8" valve and tubing. I understand the older models were 1/4" and had some issues with clogging. My nutrients are Jacks and they are very clean in my opinion.
Ask away if you have any questions. I'll try to answer based on my first time use.