....I know it sounds like something out of Back to the Future but what do you guys think of this? My cloning isn't the best (normally get about 50% strike rate) but this just looks a LOT easier if it does what it says and for jus over $100USD I think I'll purchase. Looking to some of the more experienced posters opinions, Roseman, Al B Fuct, VV?
Here's the "FAQ":
Why don't the leaves need misting?
The air pump forces air through a bubble stone sitting on the bottom of the tank, this causes warm humid air to rise past the leaves and keep them moist. Not only does this cut out the need to mist them, but because the water can be dosed with a rooting accelerant this will feed the leaves also.
Will the rockwool cubes dry out?
The rockwool cubes are suspended in a polystyrene cell tray that floats with the water continuously sitting ¼ the way up the cubes keeping them nice and moist.
If the cubes are wet all the time will the cuttings rot?
In most cases cuttings that are left in stationary water for long periods of time can be affected by fungal problems. To overcome this possible problem the RapidCloneT continuously oxygenates the water with the air pump, this is an excellent way to deter any fungal problems. The option of safely adding a fungal deterrent to the tank is also explained in the manual.
What about controlling the humidity?
There are three items working together to control the humidity. The governed heat pad ensures a warm water temp, the air pump injects the air at the rate of 100ltr/per hour, and the gaps in the lids are in ratio to the air pump output to keep a perfect and constant humidity level between 70% - 80% day and night.
Will the RapidCloneT reduce the time for the cuttings to root?
No, it will still take the normal amount of time; this is usually between 8 - 14 days depending on the strength and type of plant you are taking cuttings from. However, due to the cuttings receiving the perfect environment in the RapidCloneT they will surprise you by forming larger clusters of roots that explode out of the bottom of the cubes resembling a thick healthy jungle.
Why are other automated cuttings units more expensive?
Because most other automated units use techniques such as NFT, Aeroponics or Flood and Drain, they need extra equipment to operate e.g. water pumps, misters, valves, extra plumbing etc. The RapidCloneT operates by a method known as deep water culture, the very first form of hydroponics. It's simple, it works well, and requires less technical components. All automated systems described above perform well, but the RapidClone is available at a much better price.
What types of plants are suitable for the RapidCloneT?
This unit has great success with all types of plants; any plant that has the gene ability to be reproduced via the cuttings method will thrive in the RapidCloneT. This unit is ideal for the hydroponics or home garden enthusiasts, a great way to multiply, introduce, swap, or sell a wide variety of plants.
Here's the "FAQ":
Why don't the leaves need misting?
The air pump forces air through a bubble stone sitting on the bottom of the tank, this causes warm humid air to rise past the leaves and keep them moist. Not only does this cut out the need to mist them, but because the water can be dosed with a rooting accelerant this will feed the leaves also.
Will the rockwool cubes dry out?
The rockwool cubes are suspended in a polystyrene cell tray that floats with the water continuously sitting ¼ the way up the cubes keeping them nice and moist.
If the cubes are wet all the time will the cuttings rot?
In most cases cuttings that are left in stationary water for long periods of time can be affected by fungal problems. To overcome this possible problem the RapidCloneT continuously oxygenates the water with the air pump, this is an excellent way to deter any fungal problems. The option of safely adding a fungal deterrent to the tank is also explained in the manual.
What about controlling the humidity?
There are three items working together to control the humidity. The governed heat pad ensures a warm water temp, the air pump injects the air at the rate of 100ltr/per hour, and the gaps in the lids are in ratio to the air pump output to keep a perfect and constant humidity level between 70% - 80% day and night.
Will the RapidCloneT reduce the time for the cuttings to root?
No, it will still take the normal amount of time; this is usually between 8 - 14 days depending on the strength and type of plant you are taking cuttings from. However, due to the cuttings receiving the perfect environment in the RapidCloneT they will surprise you by forming larger clusters of roots that explode out of the bottom of the cubes resembling a thick healthy jungle.
Why are other automated cuttings units more expensive?
Because most other automated units use techniques such as NFT, Aeroponics or Flood and Drain, they need extra equipment to operate e.g. water pumps, misters, valves, extra plumbing etc. The RapidCloneT operates by a method known as deep water culture, the very first form of hydroponics. It's simple, it works well, and requires less technical components. All automated systems described above perform well, but the RapidClone is available at a much better price.
What types of plants are suitable for the RapidCloneT?
This unit has great success with all types of plants; any plant that has the gene ability to be reproduced via the cuttings method will thrive in the RapidCloneT. This unit is ideal for the hydroponics or home garden enthusiasts, a great way to multiply, introduce, swap, or sell a wide variety of plants.