i have a 4x4x6.5 grow tent from growtents.com, looking to grow 5 blackjack from nirvanashop.com (or however many germinate) just about to make my last bulk purchase and just wondering if this should be good to get started
total setup will look like this-
- grow tent (4x4x6.5) with 3 passive intake flaps on bottom and 1 4" side vent hole... really annoying because it was advertised as a 6" vent but it is actually 4 so im worried about temp control
- 1000w cool tube hps/mh system (http://www.thelashop.com/cool-tube-hps-mh-grow-light-kit-250w-400w-600w-1000w.html?utm_source=googlepla&utm_medium=cpc&gclid=CNeUsfu08rICFcV7QgodanwAYQ)
- 6" fan for light
- oscillating tower fan for breeze inside tent
- 4" inline fan from hgtsupply.com.. yeah i know it sucks its 4" but thats all i can do right now
- 6" exhaust/carbon filter from hgtsupply.com (purchased seperate so i can space things out.. will purchase fan 1st then filter closer to budding)
- ducting to run out of the window to intake cooler air and ducting running inside for exhaust to heat my room that will be freezing because the windows open
have i done enough to offset the fact that the fan i want to get is only 80cfm? there is passive intakes and with the cool tube and digital ballast i was hoping it would help keep the temps down. i want to start next week so i will be looking to upgrade some fans etc in the future but right now im looking for just enough to slide by to start with.
your thoughts on this would be much appreciated
total setup will look like this-
- grow tent (4x4x6.5) with 3 passive intake flaps on bottom and 1 4" side vent hole... really annoying because it was advertised as a 6" vent but it is actually 4 so im worried about temp control
- 1000w cool tube hps/mh system (http://www.thelashop.com/cool-tube-hps-mh-grow-light-kit-250w-400w-600w-1000w.html?utm_source=googlepla&utm_medium=cpc&gclid=CNeUsfu08rICFcV7QgodanwAYQ)
- 6" fan for light
- oscillating tower fan for breeze inside tent
- 4" inline fan from hgtsupply.com.. yeah i know it sucks its 4" but thats all i can do right now
- 6" exhaust/carbon filter from hgtsupply.com (purchased seperate so i can space things out.. will purchase fan 1st then filter closer to budding)
- ducting to run out of the window to intake cooler air and ducting running inside for exhaust to heat my room that will be freezing because the windows open
have i done enough to offset the fact that the fan i want to get is only 80cfm? there is passive intakes and with the cool tube and digital ballast i was hoping it would help keep the temps down. i want to start next week so i will be looking to upgrade some fans etc in the future but right now im looking for just enough to slide by to start with.
your thoughts on this would be much appreciated