can i flower under flouros?

dacheefmiester

Well-Known Member
i have 2 four foot 40 watt flouros. its been growing great so far its been 24 hrs. are they strong enough to flower?
 

hillgrower999

Well-Known Member
Ah im growing with 2 40watt flouros also.
however its not enough light power to flower, buy 2 cheap cfls from your local wal mart its only about 10 dollars for 2 of them or something, the flouros +the cfls will be enough to flower but it wont be the best yield.

do you have any pics?
 

orangeade5

Well-Known Member
square footage of your grow space and how many plants would come into play too, sure that could flower like 1 plant in a 1ftx1ft area
 

hillgrower999

Well-Known Member
as i said you could do that but it would be a small yield, if its sunny outside your best bet would be to put it out there..

pictures would really help
 

MrFishy

Well-Known Member
I've done this many, MANY times. Obviously not ideal, but will work. Buds won't get huge but can be nice sized. Bottom buds will be airy and small (popcorn).
This round, my wife found some 6$ gro-lux type regular fluros somewhere. Not sure they helped, but might have. I use 3 two-tube fixtures . . . 6 tubes, but have done similar with just two fixtures, four tubes.
Pics below grown totally under regular 40W fluro (12$ @ W-Mart w/tubes)
WRhino . . . cured harvest 100 gms.
If you only have one 2-tube fixture, springing for another will perhaps double your harvest w/plain fluro.
:blsmoke:
There's plenty on training, etc. in the FAQ's maybe under increasing yield?
 

Attachments

anhedonia

Well-Known Member
Better yet. Get some t5's with reflectors in there and flower usng the warm whites. I just bought a 4bulb fixture for $140. And if you want to flower just switch the bulbe from cool whites to warm whites. And dont forget that a fixture like that can always be used in a clone/seedling room when you upgrade. Have 4-8 t5's for veg a 250-400 watt HPS and you have a perpetual harvest.
 

hillgrower999

Well-Known Member
i have 2 ,4 foot long 40 watt fluoros in a grow box 2 feet tall 5 foot in length, its light sealed and inside is all white paint so its very bright.
i have 1 plant in there how much will it yield by the time its done?

mainly asking you "MrFishy" you seem to know alot about growing with fluros
 

MrFishy

Well-Known Member
Depends on what you do with it. I mean, obviously I LST'd (trained) the one in the pics, and it'd been topped, I'm sure. Strain also comes into play. Up to an ounce, cured, per plant is not unreasonable.
As you grow, you'll learn how to suck the most out of each plant. If it's growing straight up, you might wanna tie it down, so the side branches will grow and reach for the light. This will increase your top yield. That's enough space for at least another plant, IMO. There's lots of things you can do to increase the size of your canopy. If the plant gets over about a foot tall, you can remove the bottom third branches, cuz' they won't flourish anyway from lack of enough light. This will also direct more growth above.
 

MrFishy

Well-Known Member
30 years of practice. Purdy, weren't she? Tasty, yes indeed!
Basically tied down the stalks after the stretch. Actually, that plant is one I revegetated after realizing it was an exotic strain from a medbag seed. First harvest I got about 8 buds half the size of a pinky. Pretty sure it's WRhino.
Strain alive and well.
 

dacheefmiester

Well-Known Member
i want to put it outside but i cant. its in my closet, the most resent pics i have are from 8/13 its grown alot since then.
 

K1Ng5p4d3

Junior Creatologist
he topped his plants. When it gets big and healthy enough to top (should be about 3 weeks), just go like 2 nodes down from the top, where you have 2 offshoots from the main stem coming out, and cut right above the two branches that are shooting out. Those two offshoots will become tops, and their branches will get beefy and fat like the rest of the main stem. I heard you can do this something like 3 or 4 times, to end up with up to 8 tops, but dont quote me on that, i dont know the exact number. Good luck!
 

W33D

Well-Known Member
These were harvest at just over 1ft, flowered under 2 4ft 40w fluorescent tubes. The final buds:







 

MrFishy

Well-Known Member
These were harvest at just over 1ft, flowered under 2 4ft 40w fluorescent tubes. The final buds:

You could have quadrupled your take by simply bending those plants down and to the side, then tying them down there. Moving the plants to the light instead of the light to the plants (as close as possible, even touching now and then) allows each plant to grow at it's own rate, rather than all of them reaching for light because one is excelling. With the long, flat fixture, it's near impossible to light a 12" plant along side a 8" plant, thus the above suggestion.
24/0 seems much better than 18/6 when using these cheap fluros. The plants stretch/reach during darkness.
Two 2-tube fixtures make a load of difference with these (4tubes)
:fire:


he topped his plants. When it gets big and healthy enough to top (should be about 3 weeks), just go like 2 nodes down from the top, where you have 2 offshoots from the main stem coming out, and cut right above the two branches that are shooting out. Those two offshoots will become tops, and their branches will get beefy and fat like the rest of the main stem. I heard you can do this something like 3 or 4 times, to end up with up to 8 tops, but dont quote me on that, i dont know the exact number. Good luck!

I've always topped to ensure my plants don't outgrow the fluros' abilities, plus it promotes so much more canopy growth than a "stick" plant. Those can do alright (up to an ounce) under fluros, but ya gotta do 24/0 and allow the plants to grow at their own rate. (see above)
No real need to go down a node or two. Just remove the top cluster for the same result.
You CAN do this as many times as you want, but each topping results in retarded plant growth in overall vegetative size, and smaller budz.
BTW, I should've denoted the dimensions of the plant in the pic. It was 11"-12" tall, 30"+ circumference, 7"-8" thick canopy.
:clap:
 

K1Ng5p4d3

Junior Creatologist
well that was a beautiful harvest if i may say so. All im usin is a couple lamps with some good cfl bulbs , and one lower wattage cfl in the fixture in my closet ceiling, just so theres no shadows anywhere. I gotta start talkin to some of you guys who aint usin HPS or MH bulbs and are getting nice yields, cuz my next grow is probably gonna be similar to what you got fishy. Either that or im gonna go aeroponic depending on my financial situation in a couple months. Hope u dont mind me pickiin at your brain sometime soon man :)
 

K1Ng5p4d3

Junior Creatologist
n W33D, was that your first attempt? either way, even though you didnt get much, the nuggets look pretty nice IMO. Whatd u get from each plant, like a quarter oz? even with that, its a good learning experience, and you got some nice smoke out of it. Still win/win in my book.
 

MrFishy

Well-Known Member
Sure, I'd TRY and answer any fluro growing concerns. A couple 4 foot fixtures can keep a guy/gal smokin'. It all boils down to ones stash needs. I've been growin' since the 60's and am just now awaiting my first HPS (600Wdigital). If you haven't, check out the deal at HTG.
I was under the impression HPS were expensive. They're really not all that much and I look forward to harvesting the big colas, not the measly 5-6 incher's I got off my last fluro grow. I did get LOTS of silver dollar sized nugs, tho.
High Tech Garden Supply
 
Top