HghFlyrJD1
Active Member
I decided i was gonna make A BUBBLE CLONER after not having the best success with the SNIP-DIP-PLANT Method..Im sure its also part my NOOB skills,But Still Come on.. SO....I went with my ideas, plus after seeing the "HOW TO" article in the "1000watts Magazine" it was clear this was easy enough to pull off and it would actually make this cloning process a lot easier and faster.This is for the patients with Smaller grows who need smaller units for there gear.
-1-Storage Box/With a Top(Flatter The Better)..Nice Shoe Box Size with a lil Depth to it.
-1-Air Pump...(The more powerful the better(To a Point)..More Air!,To push what ever amount of clone spots and size air stones you decide to use.I used a basic one with 2 Hose Line Out lets.
-2Ft of Hose to fit on the pump and onto the Air stones....My pump has 2 OUTLETS FOR 2 STONES some pumps only have 1 outlet SO YOU WILL NEED 1 "T"Adapter splitter to run 2 air stones from a 1 outlet pump.
-Aluminum tape..(or something to line or paint the top and bottom with to keep ALL light OFF the ROOTS.(NO LIGHT IS TO GET ON THE ROOTS!!!)
-6-2" Neoprene Inserts.(More If You Run More Spots)(Foam)(These hold the Clone by the Stem,Keeping them in Place Above the Aerated Water Mixture Below.
**I mounted the pump to one of the short sides of the Container using Brackets and A couple bolts i had around.(Not Needed)
**I plan to use Clonex and Super Thrive in the water..PH SET TO 5.8.
***************VERY IMPORTANT TO HAVE A PH OF 5.8.************
**I Built this with all NEW parts for UNDER $35...NOT INCLUDING WHATEVER CLONING SOLUTION YOU CHOOSE TO USE.
**I hope this will help others looking to simplify things as much as possible and to have a better chance at being successful at growing there own Medications.Thanks For Checking it out...
-1-Storage Box/With a Top(Flatter The Better)..Nice Shoe Box Size with a lil Depth to it.
-1-Air Pump...(The more powerful the better(To a Point)..More Air!,To push what ever amount of clone spots and size air stones you decide to use.I used a basic one with 2 Hose Line Out lets.
-2Ft of Hose to fit on the pump and onto the Air stones....My pump has 2 OUTLETS FOR 2 STONES some pumps only have 1 outlet SO YOU WILL NEED 1 "T"Adapter splitter to run 2 air stones from a 1 outlet pump.
-Aluminum tape..(or something to line or paint the top and bottom with to keep ALL light OFF the ROOTS.(NO LIGHT IS TO GET ON THE ROOTS!!!)
-6-2" Neoprene Inserts.(More If You Run More Spots)(Foam)(These hold the Clone by the Stem,Keeping them in Place Above the Aerated Water Mixture Below.
**I mounted the pump to one of the short sides of the Container using Brackets and A couple bolts i had around.(Not Needed)
**I plan to use Clonex and Super Thrive in the water..PH SET TO 5.8.
***************VERY IMPORTANT TO HAVE A PH OF 5.8.************
**I Built this with all NEW parts for UNDER $35...NOT INCLUDING WHATEVER CLONING SOLUTION YOU CHOOSE TO USE.
**I hope this will help others looking to simplify things as much as possible and to have a better chance at being successful at growing there own Medications.Thanks For Checking it out...
