CLU048 1212 build

Hey guys,

Finally got my parts together and wanted to show it here to make sure i am not overlooking anything. Will be building the light shortly. Planning to use 2 * 3000k and 2* 4000k in a H shaped frame.

Wil be placed in a 90* 90 * 180 cm space. Want to run them close to the max of the driver at 2,1 amp. Want to space the cobs 50 cm apart. Also got a potentiometer to dim. Hope you guys have some feedback for me.

Cheers

Full part list:
-12v 800mA driver
-Wago connectors
-MX-4 thermal paste
-Steelwire
-Flux-6 (soldering)
-4* Alphine 11 plus fan
-HLG-320H-C2100B meanwell driver
-Silver solder
-2* CLU048-1212c4-303M2K1
-2* CLU048-1212C4-403M2K1
-3* Molex adapter 1 to 2
-M3 self tapping screws
- Electric wire VD1,5mm
-4* holder for cob
-L-brackets
-L profile aluminum
-potentiometer 100k resistance
-10w 10k concrete resistance

Gonna be an easy build. Good luck

Just completed my first build of a veg and flower light couple wks ago. Veg light=12 clu 048 1212 6500k 3 hlg 185-1400b drivers flower light= 20 cxb 3590 3000k 90cri 5 hlg 240-1750b drivers. That shit was difficult and I'm an electrician. Lots of little tedious work with those damn 6×36 aluminum heatsinks. Took forever but now I have a masterpiece! I also made a new 30 site aeroponic cloner. It's working like a charm. Already got roots and bumps after 7 days.

GreenMotion said:

Full part list:
-12v 800mA driver
-Wago connectors
-MX-4 thermal paste
-Steelwire
-Flux-6 (soldering)
-4* Alphine 11 plus fan
-HLG-320H-C2100B meanwell driver
-Silver solder
-2* CLU048-1212c4-303M2K1
-2* CLU048-1212C4-403M2K1
-3* Molex adapter 1 to 2
-M3 self tapping screws
- Electric wire VD1,5mm
-4* holder for cob
-L-brackets
-L profile aluminum
-potentiometer 100k resistance
-10w 10k concrete resistance

Click to expand...

U gone push them bitch hard ain't you. Go hard or go home right!

Vonkins said:

U gone push them bitch hard ain't you. Go hard or go home right!

Click to expand...

Yeah, this was about the max. Can always dim when needed. Light will be used for veg and early flower. Couldnt figure out what efficiency i would get when i run this flat out, anybody got some estimate?

Vonkins said:

Just completed my first build of a veg and flower light couple wks ago. Veg light=12 clu 048 1212 6500k 3 hlg 185-1400b drivers flower light= 20 cxb 3590 3000k 90cri 5 hlg 240-1750b drivers. That shit was difficult and I'm an electrician. Lots of little tedious work with those damn 6×36 aluminum heatsinks. Took forever but now I have a masterpiece! I also made a new 30 site aeroponic cloner. It's working like a charm. Already got roots and bumps after 7 days.

Click to expand...

got some pics?

CobKits said:

got some pics?

Click to expand...

I dont post pics to the Web. Sorry. I should've took pics before my ladies were added. I will get some in a few more weeks when it's harvest time after I clean.

i was just lookin for a pic of the light, no worries!

So today i have been building on the light and it is shaping up nicely. Only one concern at the moment when i wired all the fans up in parallel 1 of the fans didn't move. I checked it with multimeter and it does have a complete circuit. Could it be that my driver is not strong enough to power all 4 of the fans? Driver is 12v at 800mA. The fans are Artic 11 plus.

For the base of the frame i am using an old ladder of a bunk bed. Using a old pc power supply casing as junction box. Is it possible to use the on/off switch and intergrate this in the circuit? See pic for details.