Hi everyone long time no see, just wanted to post here on peoples opinions really of my intention of setting up my grow room.
Room Size 5m x 4m x 2.6m
Construction 3x2 plasterboard outside, 1.loft insulation covered with bubble wrap and then tin foil and then 2mm plywood then recovered with mylar.. should that stop me from glowing?
Fan size Extract 12" Acoustic 4250m3/hr with a 12" phresh filter 315mm x 1000mm 3000m3/hr
Inlet Rvk 2750m3/hr
Lights 10 x 600w HPS
1 x sms com fan speed controller
1 x ec/ & ph meter
1 x aquarium heater
1 x air pump
1 x 10 Light contactor
Growing method NFT Homemade grow table out of chipboard covered in pondliner with a large water butt / container underneath to hold nutes & food etc.
Homemade spray bars mounted accross NFT Table for even water distribution.
Anybody reccomend a pump or does anyone have a litres per hour calculation based on per plant as i dont know how to work out what pump i will need.
1 final question...
I need to add an additional circuit to the consumer unit for the electrics solely for this grow, does anyone have any suggestions were to start without consulting an electrician because the socket locations they may get suspicious.
Thanks Guys hoping to get this grow on in the next 6 weeks and will take photos & update along the way.
Room Size 5m x 4m x 2.6m
Construction 3x2 plasterboard outside, 1.loft insulation covered with bubble wrap and then tin foil and then 2mm plywood then recovered with mylar.. should that stop me from glowing?
Fan size Extract 12" Acoustic 4250m3/hr with a 12" phresh filter 315mm x 1000mm 3000m3/hr
Inlet Rvk 2750m3/hr
Lights 10 x 600w HPS
1 x sms com fan speed controller
1 x ec/ & ph meter
1 x aquarium heater
1 x air pump
1 x 10 Light contactor
Growing method NFT Homemade grow table out of chipboard covered in pondliner with a large water butt / container underneath to hold nutes & food etc.
Homemade spray bars mounted accross NFT Table for even water distribution.
Anybody reccomend a pump or does anyone have a litres per hour calculation based on per plant as i dont know how to work out what pump i will need.
1 final question...
I need to add an additional circuit to the consumer unit for the electrics solely for this grow, does anyone have any suggestions were to start without consulting an electrician because the socket locations they may get suspicious.
Thanks Guys hoping to get this grow on in the next 6 weeks and will take photos & update along the way.