Couple questions Vero 29 build

I'm wanting to run two 3000k Vero 29s at 2.2a.

I was suggested this driver but I don't know if it will run one or both of the veros29s...

http://www.ebay.com/itm/100W-Watt-High-Power-LED-Driver-AC90V-265V-50-60HZ-Waterproof-/181302171749

I also plan on using two alpine 11 heatsinks. At 7.5a will this ac/dc adapter run both or only one alpine 11?
http://www.ebay.com/itm/5V-7-5V-9V-...t=LH_DefaultDomain_0&var=&hash=item4614d5989d

I really appreciate any help

Sorry I probably should've posted this in the how to power LEDs thread.

All good, you would need one driver for each COB. Yes that adapter would work and could power both fans and good feedback but it appears to be a generic adapter. Generic adapters work fine, I use them but I try to encourage OEM quality adapters even if they are used. It is tricky to get decent efficiency from these adapters unless you can load match by running the adapter near its max current. This one is efficiency level 5 so it has a better chance of a decent efficiency when not load matched, but ideally you would want a smaller current output.

7.5V 1A efficiency level 5:
http://www.ebay.com/itm/JX-AC-DC-Po...261?pt=LH_DefaultDomain_0&hash=item258e9ea7c5

http://www.ebay.com/itm/Netgear-FA-...932?pt=LH_DefaultDomain_0&hash=item27f6c33d74


7.5V .5A efficiency level 4:
http://www.ebay.com/itm/NEW-THOMSON...110?pt=LH_DefaultDomain_0&hash=item3cb45fd12e

Awesome possum my brotha. Gonna grab a couple of those drivers then and I'll get one of the ac adapters you linked. Thank you