DIY parts help

T

trx250x7

Well-Known Member
I am going to give diy a shot and need some help. I am a little confused as to what will work together. I want to start with a single cob unit and have these parts picked out. No clue if they will work together or not. the power supply is where I have the most trouble understanding what is needed. If anyone tell me if these willl work together or show me what will. a parts list that is fully on Amazon would help allot

http://www.amazon.com/Lighting-Moun...TF8&qid=1430620314&sr=1-7&keywords=cob+holder

http://www.amazon.com/gp/product/B007BVCBOE/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2T6N244WTLWGU


http://www.amazon.com/gp/product/B00HQSM0PM/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A32YFGIGVL6BLC

http://www.amazon.com/gp/product/B000OGX5AM/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=A30YNTVQ04HG16

http://www.amazon.com/gp/product/B003OQVGP0/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

power supply?
http://www.amazon.com/MEANWELL-Comp...=1430620507&sr=8-14&keywords=led+power+supply
 
I have cree on my list too I wasnt too sure witch one to go with. what should I look for in a power supply? thank you for the reply
 
Good luck doing DIY led with only amazon.

I ordered from 4 online electronics stores for my last DIY build... for 4 items... not because I love pain. If you think you can find everything on amazon, go for it.. I wasn't even trying to save money. I would been okay paying slightly more to avoid having to do that.
 
trx250x7 said:
I am going to give diy a shot and need some help. I am a little confused as to what will work together. I want to start with a single cob unit and have these parts picked out. No clue if they will work together or not. the power supply is where I have the most trouble understanding what is needed. If anyone tell me if these willl work together or show me what will. a parts list that is fully on Amazon would help allot
Click to expand...

You've picked out a Vero 29, so take a look at the datasheet page 6...

http://www.bridgelux.com/sites/default/files/resource_media/DS33-Bridgelux-Vero-29-Datasheet.pdf

The Tj25C voltage is generally the max voltage necessary for the test current. You want a constant current driver that will supply that voltage. Down the sheet a little further you will find voltage requirements for commonly used currents, so if you wanted to drive them with a 1.4A driver the voltage requirements would change slightly (though not likely to make a difference in driver selection for a single emitter).

If you want to buy everything from Amazon I would suggest browsing for drivers on MeanwellUSA to make a selection and then looking for it on Amazon. The driver bicit suggested would be a good choice for either the Vero 18 or Vero 29.

http://distributor.meanwellusa.com/webnet_usa/search/seriessearch.html

Also, was it a calculated decision to use a 5000K emitter? Most people have been using 3000-4000K for full cycle.
 
churchhaze said:
Good luck doing DIY led with only amazon.

I ordered from 4 online electronics stores for my last DIY build... for 4 items... not because I love pain. If you think you can find everything on amazon, go for it.. I wasn't even trying to save money. I would have paid slightly more to avoid having to do that.
Click to expand...
I can hope and dream lol
 
Rahz said:
You've picked out a Vero 29, so take a look at the datasheet page 6...

http://www.bridgelux.com/sites/default/files/resource_media/DS33-Bridgelux-Vero-29-Datasheet.pdf

The Tj25C voltage is generally the max voltage necessary for the test current. You want a constant current driver that will supply that voltage. Down the sheet a little further you will find voltage requirements for commonly used currents, so if you wanted to drive them with a 1.4A driver the voltage requirements would change slightly (though not likely to make a difference in driver selection for a single emitter).

If you want to buy everything from Amazon I would suggest browsing for drivers on MeanwellUSA to make a selection and then looking for it on Amazon. The driver bicit suggested would be a good choice for either the Vero 18 or Vero 29.

http://distributor.meanwellusa.com/webnet_usa/search/seriessearch.html

Also, was it a calculated decision to use a 5000K emitter? Most people have been using 3000-4000K for full cycle.
Click to expand...

I use 3 1000 watt hid lights in an 11 foot long area and want to replace the middle light with led. I am trying one just for supplemental for now to see if I can build it and be happy with the outcome. So I want a higher k . Once I see if it's something I want to build more of I will be using mostly 3000k or 4000k with a couple 5000k to replace the whole lighting system... That is my idea at least it can change based on advice from more experienced growers
 
I feel like hours of reading I have done mean nothing at this point. I appreciate the time your taking to respond and help
 
You must log in or register to reply here.

Similar threads

B
Converting DWC to RDWC
2
Replies
22
Views
2K
Boatguy
Boatguy
X
Gorilla Cookies Autoflower - Sonoma Seeds - First Grow - MICROGROW
Replies
2
Views
258
Spiderfarmerled
Spiderfarmerled
by2
Washing machine for bubble hash
Replies
14
Views
887
SBNDB
SBNDB
Marq1340
Why Can't You Starve In The Desert?
Replies
4
Views
794
Marq1340
Marq1340
A
Super Skunk Week 4 Bloom
Replies
3
Views
580
DOCTORDOOB
DOCTORDOOB
Back
Top