K Kooshkoosh New Member Jan 19, 2017 #1 Does anyone have any ideas how to connect a shut off valve to a drain hole in an aero cloner?
friedguy Well-Known Member Jan 20, 2017 #2 This is taken from: https://forum.grasscity.com/threads/lets-build-a-bubble-bucket-step-by-step.121335/ Parts needed: Drill w/ 3/4" drillbit 2x #15 O-Rings 1x 1/2" Threaded Male PVC adapter 1x 1/2" Threaded female PVC valve 1x 1/2" male threaded to 1/2 barb adapter 1/2" tubing 1. Drill 3/4" hole where you want drain to be 2. Install o-ring on threaded side of male pvc adapter 3. Insert adapter in hole from inside 4. Install 2nd O-Ring on adapter 5. Install valve 6. Install barb adapter 7. Attach 1/2" hose
This is taken from: https://forum.grasscity.com/threads/lets-build-a-bubble-bucket-step-by-step.121335/ Parts needed: Drill w/ 3/4" drillbit 2x #15 O-Rings 1x 1/2" Threaded Male PVC adapter 1x 1/2" Threaded female PVC valve 1x 1/2" male threaded to 1/2 barb adapter 1/2" tubing 1. Drill 3/4" hole where you want drain to be 2. Install o-ring on threaded side of male pvc adapter 3. Insert adapter in hole from inside 4. Install 2nd O-Ring on adapter 5. Install valve 6. Install barb adapter 7. Attach 1/2" hose